Idt™ System (Integrated Dual Feed) 2:9; Changing The Presser Foot 2:9 - Pfaff Creative performance Owner's Manual

IDT™ system (Integrated Dual Feed)
For sewing any fabric precisely PFAFF® creative
performance™ sewing and embroidery machine
provides the ideal solution: the integrated dual feed,
IDT™ system. As on industrial machines, the IDT™
system feeds the fabric from the top and bottom
at the same time. The material is fed precisely,
eliminating puckering on seams in light weight
fabrics such as silk and rayon. The dual feed action
of the IDT™ system prevents layers from shifting
while sewing, keeping quilt layers aligned and
ensuring a more perfect match when sewing plaid
or striped fabrics.
Engaging the IDT™ system
Important: For all work with the IDT™ system use
presser feet with the center back cut-out.
Raise the presser foot. Press the IDT™ system down
until it engages.
Disengaging the IDT™ system
Raise the presser foot. Hold the IDT™ system with
two fingers at the ribbed ankle. Pull the IDT™
system down, then pull it away from you to release
the IDT™ system slowly upward.
Changing the presser foot
Remove presser foot
Press the presser foot downwards until it
disengages from the presser foot holder.
Attach presser foot
Line up the pins on the foot with the gap underneath
the presser foot holder. Press upwards until the foot
snaps into place.
You can also use the presser foot up/down buttons
to raise or lower the presser foot holder. Place the
presser foot under the presser foot holder, so that
the pins of the foot snap onto the presser foot holder
when lowered.
2:9