Pfaff creative sensation Owner's Manual page 11

Hide thumbs Also See for creative sensation:
Table of Contents

Advertisement

2A - Fancy stitch foot
When sewing decorative stitches or short zigzag stitches and other utility stitches with less
than 1.0mm stitch length, use this foot. The groove on the underside of the foot is designed
to ow smoothly over the stitches.
3 - Blindhem foot with IDT™ system
This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide
on the foot is designed to ride along the fold of the hem edge.
4 - Zipper foot with IDT™ system
This foot can be snapped on either the right or the left of the needle, making it easy to sew
close to both sides of the zipper teeth. Move needle position to right or left to sew closer to
zipper teeth.
5A - Sensormatic buttonhole foot
When connected to the machine, the buttonhole is sewn in a suitable length to the button
size that has been entered into the machine.
5M - Manual buttonhole foot
This foot is used for sewing manual buttonholes. Use the markings on the foot to position
the garment edge. The nger on the back of the foot holds cording for corded buttonhole.
6A - Embroidery/ Sensormatic free-motion foot
This foot is used for embroidery and free-motion sewing. This foot can also be used for
darning.
6D - Dynamic spring foot
This foot is always recommended for embroidery.
It is also used for free-motion sewing, quilting and embroidering on especially thick or
spongy fabric. When using the Dynamic spring foot for free-motion, select Dynamic spring
foot free-motion setting in the Free-motion options window in sewing mode.
1/4" quilting foot with IDT™ system
This foot is perfect for piecing and patchwork, especially when used in conjunction with
the straight stitch needle plate. The distance from the needle to the outer edge of the right
toe is 1/4" (6mm). The distance from the needle to the inner edge of the right toe is 1/8"
(3mm).
8 - Maxi-stitch foot
This foot is used for side-motion stitches.
Important: Make sure that the IDT™ system is disengaged when using presser foot 2A, 5A, 5M, 6A, 6D and 8.
1:11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents