Olympus VH-510 Instruction Manual page 37

Hide thumbs Also See for VH-510:
Table of Contents

Advertisement

Selecting the focusing area [AF Mode]
Selecting the focusing area [AF Mode]
z (Camera Menu 1)  AF Mode
Submenu 2
The camera focuses automatically.
(If a face is detected, it is shown by
a white frame
button is pressed halfway and the
Face/iESP
camera focuses, the frame turns to
*2
green
camera chooses a subject in the
frame and focuses automatically.)
The camera focuses on the subject
Spot
located within the AF target mark.
The camera tracks the subject
AF Tracking
movement automatically to focus on
it continuously.
*1
For some subjects, the frame may not appear or may
take some time to appear.
*2
If the frame blinks in red, the camera cannot focus. Try
refocusing on the subject.
To focus on a moving subject
To focus on a moving subject
continuously (AF Tracking)
continuously (AF Tracking)
1 Hold the camera to align the AF target mark on the
subject and press the A button.
2 When the camera recognizes the subject, the AF
target mark automatically tracks the subject movement
to focus on it continuously.
3 To cancel the tracking, press the A button.
Depending on the subjects or the shooting conditions,
the camera may be unable to lock the focus or fail to
track the subject movement.
When the camera fails to track the subject movement,
the AF target mark changes to red.
Application
*1
; when the shutter
. If no face is detected, the
Selecting the method for measuring the
Selecting the method for measuring the
n ] ]
brightness [ESP/n
brightness [ESP/
z (Camera Menu 1)  ESP/n
Submenu 2
Shoots to obtain a balanced
brightness over the entire screen
ESP
(Meters the brightness at the center
and surrounding areas of the screen
separately).
Shoots the subject at the center
during backlighting (Meters the
5 (spot)
brightness at the center of the
screen).
When set to [ESP], the center may appear dark when
shooting against strong backlighting.
Shooting at higher magnifi cations than
Shooting at higher magnifi cations than
optical zoom [Digital Zoom]
optical zoom [Digital Zoom]
z (Camera Menu 1)  Digital Zoom
Submenu 2
Off
Disable digital zoom.
On
Enable digital zoom.
[Digital Zoom] is not available when [a Super
Macro] (p. 30) or [c]/[d] (p. 32) is selected.
The option selected for [Digital Zoom] affects the
appearance of the zoom bar.
"To take larger images" (p. 19)
Application
Application
37
EN

Advertisement

Table of Contents
loading

Table of Contents