Table of Contents
Advertisement
If the "Setup" dialog is not displayed, select "My
Computer" (Windows XP) or "Computer" (Windows
Vista/Windows 7) from the start menu. Double-click
the CD-ROM (OLYMPUS Setup) icon to open the
"OLYMPUS Setup" window and then double-click
"Launcher.exe".
If a "User Account Control" dialog is displayed, click
"Yes" or "Continue".
2
Register your Olympus product.
●
Click the "Registration" button and follow the on-
screen instructions.
To register the camera must be connected to the
computer. "Connecting the camera" (p. 12)
If nothing is displayed on the camera screen even
after connecting the camera to the computer, the
battery may be exhausted. Charge the battery and
then connect the camera again.
3
Install OLYMPUS Viewer 2 and [ib] computer
software.
●
Check the system requirements before beginning
installation.
●
Click the "OLYMPUS Viewer 2" or "OLYMPUS ib"
button and follow the on-screen instructions to
install the software.
14 EN
OLYMPUS Viewer 2
Operating
Windows XP (Service Pack 2 or later) /
System
Windows Vista / Windows 7
Pentium 4 1.3 GHz or better (Core 2 Duo
Processor
2.13 GHz or better required for movies)
1 GB or more (2 GB or more
RAM
recommended)
Free Hard
1 GB or more
Drive Space
1024 × 768 pixels or more
Monitor
Minimum 65,536 colors (16,770,000
Settings
colors recommended)
[ib]
Operating
Windows XP (Service Pack 2 or later) /
System
Windows Vista / Windows 7
Pentium 4 1.3 GHz or better
Processor
(Core 2 Duo 2.13 GHz or better required
for movies)
512 MB or more (1 GB or more
recommended)
RAM
(1 GB or more required for movies — 2 GB
or more recommended)
Free Hard
1 GB or more
Drive Space
1024 × 768 pixels or more
Monitor
Minimum 65,536 colors (16,770,000
Settings
colors recommended)
A minimum of 64 MB video RAM with
Graphics
DirectX 9 or later.
* See online help for information on using the software.
4
Install the camera manual.
●
Click the "Camera Instruction Manual" button and
follow the on-screen instructions.
Advertisement
Table of Contents
