Olympus VH-510 Instruction Manual page 28

Taking pictures with [Auto] Taking pictures with [Auto]
1 Press the shutter button to take the fi rst frame.
2 Move the camera slightly in the direction of the second
frame.
Target mark
Pointer
3 Move the camera slowly while keeping it straight, and
stop the camera where the pointer and target mark
overlap.
●
The camera releases the shutter automatically.
To combine only two pictures, press the A button
before taking a third frame.
4 Repeat Step 3 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the  button.
If the shutter does not automatically release, try
[Manual] or [PC].
28 EN
AUTO AUTO
MENU
Cancel Save
Screen when combining images
from left to right
AUTO AUTO
MENU
Save
Cancel
Taking pictures with [Manual] Taking pictures with [Manual]
1 Use FGHI to specify at which edge the next
picture is to be connected.
Direction for combining
the next frame
OK
2 Press the shutter button to take the fi rst frame. The
white-boxed part of the fi rst frame is displayed on joint
area 1.
1st frame
3 Compose the next shot so that joint area 1 overlaps
joint area 2.
4 Press the shutter button to take the next shot.
OK
Press the A button to combine just 2 frames.
5 Repeat steps 3 and 4 to take a third frame.
●
After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without saving an
image, press the  button.
MANUAL MANUAL
MANUAL MANUAL MANUAL MANUAL
1 1
Save
Cancel MENU
2 2
OK