Opel Corsa Owner's Manual page 229

Picture no: 17289t.tif
10. Insert bulb housing in vehicle body,
engaging the ratchet and bolt in
recesses. Tighten attachment nuts by
hand. Engage plug connector. Close
cover.
11. Carry out the following steps to ensure
proper function of the tail lamps:
– Switch on ignition
– Operate brake
– Switch on parking lamps
Picture no: 18261s.tif
3-door passenger vehicle, van
1. Disengage right and left cover in the side
luggage compartment trim, then open.
Self-help, vehicle care 223
Picture no: 18262s.tif
2. Remove plug connector by pressing on
bulb holder tab.
3. Hold bulb housing from the outside;
unscrew two retaining nuts.
Back to overview