Opel Corsa Owner's Manual page 209

5. Unscrew the wheel bolts.
If the wheel bolts have retaining
washers 3, they must not be removed.
6. Change wheel. Notes on spare wheel
3 197. Notes on temporary spare wheel
3 197.
Picture no: 17249t.tif
7. Screw in the wheel bolts. Push the wheel
bolt wrench 3 on as far as possible and
tighten the wheel bolts slightly.
8. Lower vehicle.
9. Push the wheel bolt wrench 3 on as far
as possible and tighten crosswise.
Tightening torque is 110 Nm.
Self-help, vehicle care 203
10. Before refitting the wheel trim, clean the
wheel around the retaining clips. Valve
symbol 3 on back of wheel trim must
point towards valve on wheel.
Align and refit wheel trim or wheel bolt
caps 3.
Alloy wheels 3: Align and refit wheel
bolt caps 3.
11. Stow removed wheel, tool kit and
warning triangle 3 in the luggage
compartment 3 196 to 3 198.
12. Check the tyre pressure of the newly
mounted wheel.
13. Have the wheel bolt tightening
torque (110 Nm) checked.
14. Replace the faulty tyre on the wheel
that was removed.
15. Initialise deflation detection system 3
3 164.
Back to overview