206
Self-help, vehicle care
Picture no: 18427s.tif
6. Screw the air tube to the connector on
the compressor.
7. Switch on ignition.
To prevent battery discharge, we
recommend that you leave the engine
running.
Picture no: 18428s.tif
8. Press button < on the compressor, the
tyre is filled with the sealant.
9. While the sealant bottle drains
(approx. 30 seconds) the pressure
indicator on the compressor briefly points
to 6 bar. Pressure then sinks again.
10. All of the sealant is pumped into the tyre.
Afterwards, the tyre is filled with air.
11. The prescribed tyre pressure 3 264,
should be attained within 10 minutes.
Once the pressure is attained, switch off
the compressor by pressing button <
again.
If the prescribed tyre pressure is not
obtained within 10 minutes, remove the
tyre repair kit. Move the vehicle one tyre
rotation. Reattach the tyre repair kit
and continue the filling procedure for
10 minutes. If the prescribed tyre
pressure is still not obtained, the tyre is
too badly damaged. Seek the
assistance of a workshop.
Release excess tyre pressure using
button ].
Do not operate the compressor for
more than 10 minutes, see "Important"
3 207.
Back to overview