Appendix 2 Detailed Parameters Of "General - Panasonic AF-FX100 Setup Instructions

Appendix 2 Detailed parameters of "General"

Examples of parameter settings are explained on the assumption of the following device configuration.
IP camera
LOCK OPEN
Input: 3
Image Recognition Box
Variable name
1 BoxID
2 CameraIFLibrary
3 CamIpAddr
4 CamChannel
Hub
Network Video Encoder
DG-GXE500
Message
Logical Box ID number.
Specify integer value that
is unique in the system
Name of required cam-
era type.
ip_address of ip camera
channel of encoder (ip
camera's channel is
always "1")
64
AVMDINFO_ON（for ASM）
Monitor
Settings Description
Optional The serial numbers for BOXs
integrated in a system can be
defined and registered. Using the
same ID causes no problem with
operation.
E.g.: 10
Mandatory Library names corresponding to
cameras are designated. At this
moment, only "Panasonic1"
exists.
Setting value: Panasonic1
Mandatory IP addresses of IP cameras and
encoders are registered.
E.g. 1：192.168.10.20 (IP camera)
E.g. 2: 192.168.10.21 (Encoder)
Mandatory When an encoder is registered
with "CamIpAddr", image input
number is entered.
E.g. 1: 1 (only "1" at IP camera)
E.g. 2: 3 (Encoder)
OSD_ON