Table of Contents
Advertisement
How to delete the area information
Step 1
Select the content of recognition.
Select the area information to be edited. If [Intrusion],
[Object] and [Mask] are checked, multiple pieces of
area information can be simultaneously edited.
Step 2
Select the action entry.
Select [Delete Area].
Step 3
Select the area point.
Selection of a range can be performed by the same
operation as for adding area information. (+ page 43)
Designation of a plurality of area points links among
area points with lines, and addition of 3 or more area
points makes an enclosed area.
Every time right-click is performed, a newly added
area point is deleted.
Area point
STEP1
STEP2
STEP4
Step 4
Click the [Decision] button to confirm the selected
area points.
→ The window that reflects the deleted area will be
→
displayed.
To enclose an area, at least 3 area points are needed.
An area enclosed with more than 30 points cannot be
deleted (and an error pop-up is displayed).
Clicking [Decision] with less than 3 points fail to
delete an area.
44
Advertisement
Table of Contents
