Jenn-Air JJW8527 User Manual page 4

The control panel is designedfor easein programming. The displaywindow shows time of day, timer and oven functions. Indicator words
flash to prompt your programming steps. In double ovens (select models), "U" indicates upper oven is ON and "L" indicates lower oven
is ON.
NOTE: Lower oven controls on double ovens only. Styling and features may differ slightly depending on the model.
Cancel Bake Broil
Auto Set
0
/
Clean Oven //
Light
/
/
Clean O'_V_hhl _
2
/
1 2 3
6 7 8
4
9 6
_JENN-AIR
Cancel Bake Broil / Cook Stop Timer Timer Time Time Clock One Two
Lock
FUNCTION PADS
• Touch the desired pad.
• Touch the Auto Set (0) pad or the
appropriate number pad(s)to enter time
or temperature.
• A beep will soundwhen anypadistouched.
NOTE: Five seconds after entering the
number, the time or temperature will auto-
matica[ly be entered. If more than five
seconds elapse between touching a func=
tion pad and the number pads, the func=
tion will be cancelled and the display will
return to the previous display.
NU ' BER PADS
Use to set time or temperature.
Useto cancel all programming except Clock
and Timer functions.
Use for conventional baking or roasting.
I. Press Bake pad.
2.. Pressthe Auto Set (0) padfor 350° For
appropriate number pads for desired
temperatu re.
See page4 for additional information.
Use for top browning and broiling.
I. Press Broil pad.
2.. Pressany number pad to set "Hi" broil
temperatu re.
See page 6 for additional information.
Use to set self-clean cycle.
I. Press Clean pad.
2. Press Auto Set (0) pad for "3:00"
hours of cleaning,press the appropriate
number pads for the time desired after
"3:00" appears in the dispEay. Press2 for
"2:00" hours or 4 for "4:00" hours.
See page 8-9 for additional information.
COOK TI[ IE/STOP
Use to program the oven to start and stop
automatically.
1. PressBake pad. Press the appropriate
number pads for desired temperature.
2. Press Cook Time pad. Press the ap-
propriate number padsto enter cooking
time in hours and minutes.
3. To delay the start of cooking, press
Stop Time pad. Pressthe appropriate
number padsto enter the time you want
the oven to stop.
See page 6-7 for additional information.
3
SETTING THE CLOCK
I. Press Clock pad.
• The indicator word TIME will flash in
the display.
2. Pressthe appropriate number padsuntil
the correct time of day appears in the
display.
When electrical power issupplied or after
a power interruption, the last clock time,
before power was interrupted, will flash.
To recallthe time of daywhen another time
function is showing, press the Clock pad.
Clock time cannot be changed when the
oven hasbeen programmed for clock con-
trolled oven operations or self-clean.
SETTING THE TI ]ER
Use to set and then signal the completion
of a time period up to II hours and 55
minutes
(I 1:55).
The timers can be used independently of
any other oven activity and can be set while
another oven function is operating. The
timers do not control the oven.
I. Pressa Timer pad.
• The indicator word TIMER will flash
along with #l or #2 plus "0HR:00"
appears in the display.