Using The Console; Ac Adapter - Omega CO-E130 Instruction Book

CAL
USING THE CONSOLE
The elliptical trainer is equipped with a programmable console to heJp you reach your fitness
goals. The console provides different programs designed to meet your exercise
requirements. In addition, the console has a wide variety of modes that enable you to
monitor your performance as you exercise.
The console is powered from the mains supply
via an adapter.
AC ADAPTER
Plug the AC Adapter into the AC in jack at the
rear of the elliptical trainer. Connect the 2 pin
plug to the AC socket.
If held, the up and down buttons will
switch between the MANUAL and
PROGRAM modes automatically.
SWiTCHiNG ON
, Switch on the mains suppJy. The console
will emit a BEEP and reset itself.
SWiTCHiNG OFF
, if the console is not used for severaJ
minutes, it switches off automatically and
resets all values to zero. Press any button
to switch the console back on again.
• To switch the console off, switch off and
unplug the adaptor from the AC supply.
TRAiNiNG WITH NO PRESET
FUNCTION
. Press the RESET button for more than 2
seconds to dear the previous program.
• MANUAL and PROGRAM will be flashing
on thetop screen. Press the START/STOP button to select MANUALwith no preset
functions.
• The lower display will show '1' and the corresponding resistance row pattern will be
displayed. Whilst you are training you can change the resistance level using the UP/DOWN
buttons.
OMEGA Fitness 15