2.7 SEAT
2.7.1
Type: Standard seat with high back, foam padded (internal suspension) and
armrests.
Optional seat accessories:
Custom ride suspension system to enhance Standard Seat
•
Deluxe suspension seat with high back, low profile foam-in-place cushion
•
(dampened, adjustable spring suspension) and armrests.
2.7.2
Mounting: Hinged to tilt up for access to hydraulic pumps, battery and other
components. Held in tilted position with prop rod. Adjustable fore and aft seat track.
2.7.3
Armrests: Standard seat: foam padded flip-up armrests with height adjustment.
2.7.4
Seat Safety Switch: Incorporated into the Safety Interlock System. Time delay
seat switch eliminates rough ground cut-outs.
2.8 HYDROSTATIC GROUND DRIVE SYSTEM
2.8.1
Hydrostatic Pumps: Two Hydro Gear BDP-10A variable displacement piston pumps.
2.8.2
Wheel Motors: Two Parker/Ross with 1 1/4" tapered shafts.
2.8.3
Hydraulic Oil Type: Synthetic Mobil 1 15W-50.
2.8.4
Hydraulic Oil Capacity: 2.1 qt.(2.0 L.)
2.8.5
Hydraulic Filter: Replaceable cartridge type.
P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32° F (0°C))
P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32° F (0°C))
2.8.6
Speeds:
2.8.7
Drive wheel release valves allow machine to be moved when engine is not running.
2.9 TIRES
Quantity
Tread
Size
Ply Rating
Pressure
2.10 CUTTING DECK
2.10.1
Cutting Width:
2.10.2
Discharge: Side
2.10.3
Blade Size: (3 ea.)
2.10.4
Blade Spindles: Solid steel spindles with1" I.D. bearings.
2.10.5
Deck Drive: Electric clutch mounted on horizontal engine shaft. "B" Section belt
(with self-tensioning idler) from electric clutch to transfer shaft mounted on deck.
Blades are driven by one "B" Section belt (w/self-tensioning idler) from transfer
shaft on deck to blade spindles.
2.10.6
Deck: Full floating deck is attached to out-front support frame. Six anti-scalp
rollers provide maximum turf protection. Deck design allows for bagging, mulching
or side discharge.
Optional suspension seat: molded adjustable flip-up armrests.
0-9.8 mph (15.8 km/hr) forward.
0-6.3 mph (10.1 km/hr) reverse.
Drive
Pneumatic (Air-Filled)
2
"Multi- Trac C/S"
24 x 12.00-12
4
13 psi (90 kPa)
60 in. (152.4 cm)
72 in. (182.9 cm)
w/60" Deck 20.5 in. (52.1 cm)
w/72" Deck 24.5 in. (62.2 cm)
- 13 -
Front Caster
Pneumatic (Air-Filled)
2
Smooth
13 x 6.50-6
4
13 psi (90 kPa)
Semi-Pneumatic
2
Smooth
13 x 6.50-6