Safety Signs - Exmark Lazer HP Operator's Manual

1.6 SAFETY SIGNS

1.6.1 Keep all safety signs legible. Remove all grease, dirt and debris from safety
signs and instructional labels.
1.6.2 Safety signs must be replaced if they are missing or illegible.
1.6.3 When new components are installed, be sure that current safety signs are affixed
to the replaced components.
1.6.4 New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.6.5 Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.6.6 Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO. 103-3794
LOCATION: LH Side of Console
PART NO. 107-2112
LOCATION: Top Center of Floorpan
PART NO. 107-2102
LOCATION: Inside Surface of
Upper Roll bar
PART NO. 103-3979
LOCATION: RH Side of Console
PART NO. 103-4474
LOCATION: Top Front of RH Fuel Tank
- 9 -
PART NO. 103-1798
LOCATION: Right of Throttle
Control on RH
Fuel Tank
PART NO. 98-5954
LOCATION: Under Mower Deck
PART NO. 103-4930
LOCATION: Right of Choke
Control on RH
Fuel Tank
Belt Shield(s)