Delta ShopMaster MS350 Instruction Manual page 6

CARTON CONTENTS
Remove the miter saw and all loose items from the
carton. IMPORTANT: CARRYING THE MACHINE BY
THE SWITCH HANDLE WILL CAUSE MISALIGNMENT.
ALWAYS LIFT THE MACHINE BY THE BASE OR BY
THE CARRYING HANDLE (See Fig. 29C). Fig. 2
illustrates the machine and all loose items after they
have been removed from the carton.
1 - Miter Saw
2 - Dust Bag
3 - Wrenches for changing the blade
4 - Clamp
4
Fig. 2
_ WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MITER SAW TO THE POWER SOURCE
UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE
OWNER'S MANUAL.
ROTATING TABLE TO 90
DEGREE POSITION
1. Loosen table lock handle (A) Fig. 3 one or two turns
and depress index lever (B).
2. Rotate table to the left until index stop engages with
the 90 degree positive stop (Fig. 4). Tighten table lock
handle (A).
Fig. 3
Fig. 4