Typical Installations - Kenmore THE ECONOMIZER 153.333850 Owner's Manual

[_1_,===== VENT CAP
ROOF JACK
HOT WATER
OUTLET
- MOUNTING
TEMPERED BRACKET
WATER __ T__
OUTLET
TEMPERATURE-PRESSURE
VALVE "4_e s su LY{ _ -- J | |
WATER
OUTSIDE INLET DOOR
MANUFACTURED
HOME
LOUVERED
iNSTALLATiON iN ENCLOSURE OF MANUFACTURED
HOME WITH LOUVERED EXTERIOR DOOR
VENT CAP
ROOF JACK
HOT WATER 44[- SOLID
ACCESS
OUTLET DOOR
TEMPERED
WATER
OUTLET TEMPERATURE-PRESSURE
_"M X NG ' RELIEF VALVE
VALVE S uGpApSL y I
OUTSIDE
WALL OF
MANUFACTUREDI n _ __,_T-iR "_'Jll
DRAIN /
PAN
INSTALLATION iN ENCLOSURE OF MANUFACTURED
HOME WITH SOLID EXTERIOR DOOR
* MiXiNG VALVE USAGE
FIGURE 8.
This appliance has been design certified as complying with
American National Standard/CSA Standard for water heaters
and is considered suitable for:
Water (Potable) Heating: All models are considered suitable for
water (potable) heating,
Water temperature over 125°F
(52°C) can cause severe burns
instantly resulting in severe injury
or death.
Children, the elderly, and the
physically or mentally disabled
are at highest riskforscald injury.
Feel water before bathing or
showering.
Temperature limiting valves are
available.
Read instruction manual for safe
temperature setting.
HOTTER WATER CAN SCALD:
Water heaters are intended to produce hot water. Water heated
to a temperature which will satisfy space heating, clothes
washing, dish washing, and other sanitizing needs can scald
and permanently injure you upon contact. Some people are
more likely to be permanently injured by hot water than others.
These include the elderly, children, the infirm, or physically/
mentally handicapped. If anyone using hot water in your home
fits into one of these groups or if there is a local code or state
law requiring a certain temperature water at the hot water tap,
then you must take special precautions. In addition to using the
lowest possible temperature setting that satisfies your hot water
needs, a means such as a *Mixing Valve, should be used at
the hot water taps used by these people or at the water heater.
Mixing valves are available at plumbing supply or hardware
stores. Follow mixing valve manufacturer's instructions for
installation of the valves. Before changing the factory setting
on the thermostat, read the "Temperature Regulation" section
in this manual, see Figure 26.