Typical Installation - Kenmore POWERMISE 12 Owner's Manual

GET TO KNOW YOUR WATER HEATER - GAS MODELS
A Vent Pipe
B Draft Hood
C Anode
D Hot Water Outlet
E Outlet
F Water Connections
G Gas Supply
H Manual Gas Shut-off Valve
* INSTALL IN ACCORDANCE
WITH LOCAL CODES.
* DRIP LEG AS REQUIRED
BY LOCAL CODES.
TO VENT TERMINATION
ON ROOF
* ALL PIPING MATERIALS TO BE
SUPPLIED BY CUSTOMERS.
**CLOSED WATER SYSTEMS
ARE THOSE WITH BACK FLOW
PREVENTION DEVICES INSTALLED
IN THE INLET WATER SERVICE LINE.

TYPICAL INSTALLATION

I Ground Joint Union
J Drip Leg (Sediment Trap)
K Inner Door
L Outer door
M Union
N Inlet Water Shut-off Valve
O Cold Water Inlet
P Inlet Dip Tube
FIGURE 1.
7
Q Temperature-Pressure Relief Valve
R Rating Plate
S Flue Baffle(s)
T Gas Control Valve Thermostat
U Drain Valve
V Pilot and Main Burner
W Flue
X Metal Drain Pan
(T) THERMOSTAT
(V) PILOT & MAIN BURNER