General Operation; Language; Menu Language; Disc Audio / Subtitle / Menu - JVC RX-THG51 Instructions Manual

General O peration
1. Press S ETUP.
TheSetup menu appears.
DISPLAY
2. Use • / • to select the desired option then press
• to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
3. Use • / • to select the second desired option and
then press • to move to the third level.
4. Use • / • to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
5. Press SETUP or PLAY (IDa) to exit the Setup
menu.
LANGUAGE
TV Aspect
4:3 - Select when a standard 4:3 TV is connected.
16:9 - Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
Letterbox - Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan - Automatically displays the wide picture
on the entire screen and cuts off the portions that
do not fit. (If the disc/file is not compatible with
Pan Scan, the picture is displayed at Letterbox
ratio.)
Menu Language
Select a language for the Setup menu and then on-
screen display.
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original - Refers to the original language in which
the disc was recorded.
Other - To select another language, press
numeric buttons and then ENTER to enter the
corresponding 4-digit number according to the
language code list on the page 23. If you enter the
wrong language code, press CLEAR.