Speaker System Connection - JVC RX-THG51 Instructions Manual

Speaker System Connection
Connect the speakers using the supplied speaker
cables.
To obtain the best possible surround sound, adjust the
speaker parameters (volume, distance, etc.).
Notes:
• Be sure to match the speaker cable to the
appropriate terminal on the components: + to + and
- to -. If the cables are reversed, the sound will be
distorted and will lack base.
• If you use front speakers with low maximum input
rating, adjust the volume carefully to avoid
excessive output on the speakers.
,, To connect the speaker cable to the wireless
receiver using the gray and blue colored band
cable.
Caution:
• The left and right speakers can be installed on a
wall.
• When installing the speakers on a wall, be sure to
have the speakers installed by qualified personnel.
• DO NOT install the speakers on the wall by yourself
to avoid unexpected damage from them falling off
the wall due to incorrect installation or weakness in
wall structure.
• Care must be taken in selecting a location for
speaker installation on a wall. Injury to personnel or
damage to devices may result if the installed
speakers interfere with daily activities.
Front speaker
(Right)
Center
speaker
Front speaker
(Left)
Rear speaker
(Right)
Wireless Receiver
m__
Subwoofer
Rear speaker
(Left)