Playingat Random--Randomplay - JVC CA-HXZ3 Instructions Manual

Compact component system
Hide thumbs Also See for CA-HXZ3:
Table of Contents

Advertisement

To checkthe programcontents
On the remote control ONLY:
Before playing, you can check the
program contents by pressing
(<_) or _
()_,_).
_..'_,,.
• _
(<t_) " Shows the programed
\"
tracks in the reverse order.
• _
(I_,_) : Shows them in the programed order.
To modifythe program
Before or after playing, you can erase the last
programed tracks by pressing CANCEL/DEMO
(or press PROGRAM CANCEL on the remote
control).
• Each time you press the button, the last
programed track is erased from the program.
PROGRAM
CANCEL
To add tracks in the program before playing, simply select
the track numbers you want to add by following step 4 of the
programming procedure. If you want to add tracks from
another disc, follow steps 3 and 4.
To erase the entire program before or after playing, press
and hold • until "CD PROGRAM" appears on the display.
• The program you have made will be erased,
- when you exit from Program Play mode,
- when you unplug the AC power cord, or
- when a power failure occurs.
Playingat Random--RandomPlay
The tracks of the currently selected disc will be played at
random.
• To use Repeat Play (see page 20) for Random Play, press
REPEAT after starting Random Play. Only REPEAT 1 and
REPEAT ALL can be selected for Random Play.
1 Load a disc.
2 Press the corresponding
disc number (CD1,
CD2, or CD3) button where a disc is loaded
in step 1, then press I1.
co3
CD2
CD1
3
Activate the Random Play mode.
On the unit:
Press CD PLAY MODE repeatedly
°_g_Y
until "CD RANDOM"
appears on
the display.
• Each time you press the button, the play
mode changes as follows:
CD PROGRAM _
N _M
Cancele,J•
(Continuous Play)
On the remote
control:
Press RANDOM
so that
.,.oo.
"CD RANDOM"
appears
on the display.
_
iL!
Plll_l
±11_11 I_
• The RANDOM indicator also lights up on the display.
4
Press CD I)/11.
The tracks are randomly played.
Random Play ends when all the tracks
of the current disc are played once.
CD
I_/11
%
To skip the currently playing track, turn _
/ _
to the
right (or press _
(I_,_) on the remote control).
If you turn t4< / _
to the left (or press t4< (<t_l) on
the remote control)
You cannot go back to the previous tracks during Random Play.
To stop playing, press •.
To exit from Random
Play mode, press CD PLAY MODE
repeatedly
until the RANDOM
indicator
goes off (or press
RANDOM
on the remote control)
after playback
stops.
-19-

Advertisement

Table of Contents
loading

Table of Contents