Creating Your Own Sound Mode--User; Mode; Setting The Am Tuner Interval Spacing - JVC CA-HXZ3 Instructions Manual

CreatingYourOwnSoundMode--User Mode
You can change SEA pattern to suit your preference. The SEA
pattern can be adjusted into 5 frequency ranges--LOW1,
LOW2, MID, HIGH1, and HIGH2. These changed settings
can be stored in the USER 1, USER 2, and USER 3 modes.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step 1 again.
On the unit ONLY:
1 Select one of the preset sound modes.
• If you want to add the surround elements in your SEA
pattern, select one of the surround modes (DANCE,
HALL, or STADIUM) before starting the procedure
below. (See "Selecting the Sound Modes" on page 11 .)
2 Press SET/DISPLAY while the
selected sound mode is still shown
on the display.
I_IE I_I I-- I--I I_1 _"
_ _ r'i I_ I_11_1 i
SET#
DISPLAY
%
Turn I<< / _ to select one
of the user modes (USER 1, _"_'_
USER 2, or USER 3) in
which you want to store your
SEA pattern.
6 Press SET/DISPLAY again. SET#
DISPLAY
lwl lwl I--I
IIEII!_IP_ "i
The SEA pattern you have created are stored into the user
mode selected in step 5.
To useyour ownsoundmode
Select USER 1, USER 2, or USER 3 mode when using the
sound modes. See "Selecting the Sound Modes" on page 11.
When you unplug the AC power cord or if a power
failure occurs
The
setting
will be erased in a few
days.
If this
happens, set
the user
modes
again.
I I--II I I
.L -=-I
l_ !_IH I c_']]'_
Current level appears.
3
Adjust the SEA pattern.
1) Turn _ / _ to select the
frequency range (LOW 1, LOW2,
MID, HIGH1, or HIGH2).
2) Press _ or _ to adjust the
............ ............
level (-3 to +3) of the selected {_
frequency range.
3) Repeat steps 1) and 2) to adjust
the level of the other frequency
ranges.
4 Press SET/DISPLAY again.
| ! .....
,_, ' =_', F_" Z;'......
_ _ ........ I _i_
SET#
DISPLAY
%
Setting the AM Tuner Interval Spacing
Some countries space AM stations 9 kHz apart, and some
countries use 10 kHz spacing.
On the unit ONLY:
You can only change the AM tuner interval spacing while
tuning in to an AM station. (See page 13.)
Press O/I while holding down I.
• Each time you press these buttons, the AM tuner interval
spacing alternates between 9 kHz and 10 kHz.
-12-