Playingbackdiscs; Loading Discs; Playing Back The Entire Discs--Continuous; Play - JVC CA-HXZ3 Instructions Manual

PlayingBackDiscs
Continued II_
Loading Discs
On the unit ONLY:
1
Press _ for the disc tray
(CD1, CD2, or CD3) you
want to load a disc onto.
The unit automatically turns on
and the disc tray comes out.
2
Place a disc correctly on the circle of the disc
tray, with its label side up.
I
CORRECT INCORRECT
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
Press the same _ you have
pressed in step 1.
The disc tray closes.
4 Repeat steps 1 to 3 to place other discs.
_When loading more than one disc
When you press • for the next tray you want to place another disc
onto, the first disc tray automatically closes and then the next tray
comes out.
Playing Backthe Entire Discs--Continuous Play
You can play discs continuously.
• If you start Continuous Play with an MP3 disc, you can
select a track you want to start playback with.
• For audio CDs
1
Load discs.
2
Press one of the disc number
(CD1, CD2, or CD3) buttons
for the disc you want to play.
The unit searches for the disc, and
starts playing with the first track of the
selected disc.
cD3
CD2
CD1
Track number Elapsed playing time
/
TRACK [_ ....
Ii ii
-- ....
:,
_ I. U'U
Tracks of the currently playing CD (Track
numbers exceeding 16 are not displayed.)
• For MP3 discs
1
Load discs.
2
Press one of the disc number
(CD1, CD2, or CD3) buttons
for the disc you want to play.
The unit searches for the disc (it may
takes time), and the following information
appears on the display.
cD3
CD2 CD1
Total track number Total playing time
XnA¢ €
,__,,'- _' 'I,E' '---'_ :,. "---',:, EI'-"-"__ u uoooo: ' 'oooo°°°°
[I
T n n I °_'_
i UU I _°_°
Group number flashes.
* If the group title cannot be shown at a time (exceeding
10 characters), the title scrolls.
-16-