Jenn-Air JJW3830WB00 Use & Care Manual page 7

Menu ©emons' K£ on
The following demonstrates how to program a Bake cycle,
starting at the Modes menu.
1. Touch the MODES tab to move to the Modes menu.
2. From the Modes menu, touch BAKE.
3.
Touch the Temperature tab to move to the Temperature
screen.
Use the slider to enter a desired cooking temperature or
touch the -5°F (-1 °C) or +5°F (+1°C) buttons. The temperature
must be between 170°F (77°C) and 550°F (288°C).
[] []
200= 250= 3OO" 350" 400_ 450" 500_ 550 _
I
4=
5=
Touch START to begin preheating the oven.
OR
If a Cook Time, Keep Warm or Delay Start function is desired,
touch the TIMER NOT SET to enter the Cook Time screen.
Enter a cooking length using the on-screen number keyboard
to set a timer to alert you when cooking ends. The time length
may not exceed 12:00:00.
6. (Optional) To set a delayed start, touch DELAY START and
SET. See "Delay Start" section for additional information.
7. (Optional) To keep food warm after cooking ends, set Keep
Warm ON. See "Keep Warm" section for additional
information.
8. Press START to begin preheating the oven.
9. Place food in the oven when preheat signal sounds. The
screen will say "Insert food and start timer."
10. Touch CANCEL (Cancel Upper or Cancel Lower on double
oven models) to turn off the oven.
t<tchen Tme
The Kitchen Timer is an independent timer not associated with
the Cook Timers.
1. Touch the KITCHEN TIMER button anytime needed.
2. Enter the desired time (- : : -) using the on-screen
number keyboard.
3. Touch CLEAR to clear timer back to (- : : -).
4. Touch START TIMER to initiate the function.
5. Touch CLOSE to hide the Kitchen Timer panel.
While the Kitchen Timer is running, the timer is minimized to
the bar at the right-hand side of the screen.
6. To adjust the Kitchen Timer while running, touch ADJUST and
choose "Cancel" or use the on-screen number keyboard to
re-enter a new time.
7. If "Cancel" is touched, the timer is canceled and the panel is
hidden.
8. When the Kitchen Timer is complete, a beep will sound.
9. When time expires, it is possible to add extra time by
touching the Add More Time button. Use the on-screen
number keyboard to enter additional time.
10. To hide the panel, touch OK.
This oven provides ability to control several of the default settings
and access information through the on-screen display. These
include: Button/Screen Lock, Automatically Lock After Each Use,
Clock, Date, Sound Volume, Screen Theme, Screen Brightness,
Language, Temperature Units, Self-Clean, Sabbath Mode,
Temperature Calibration, Touch Calibration, Reset All Settings to
Factory Default, and Service Information.
To access the Setup menu:
1. Touch SETUP MENU.
2. Use the scroll bar on the right-hand of the screen to view and
access settings.
Button/Screen Lock
The Button/Screen Lock function allows all the buttons to be
locked. This setting is automatically disabled if the Kitchen Timer
is running or the oven is in use.
Touch UNLOCKED at right side of screen beside "Button/Screen
Lock" to lock. Slide bar up on main screen to unlock button/
screen.
Automatically Lock After Each Use
Touch ON/OFF at the right side of screen, beside the
"Automatically Lock After Each Use" option in the Setup Menu to
activate or deactivate this function.
Clock
1. From the Setup Menu, touch the button beside Clock.
2. Enter the time using the on-screen number keyboard. A valid
time must be entered in order to save the settings.
3. If Clear is pressed, the clock clears to 00:00
4. Choose AM, PM, or 24-Hour.
5. Touch ON/OFF to toggle between Auto Daylight Savings
Time. When "On," the clock will automatically be adjusted
when daylight saving time occurs.