Adjusting Oven Temperature; Oven Operation; Light/Vent - Jenn-Air JJW9527 Guide Manual

Oven Operation
Adjusting Oven Temperature
If you think the oven should be hotter or cooler, you can adjust
it yourself. To decide how much to change the thermostat, set
the oven temperature 25°F higher or lower than the tempera-
ture in your recipe, then bake. The results of the "test" should
give you an idea of how much to adjust the thermostat.
Oven Light
The oven light automatically comes on whenever the oven
door is opened. When the door is closed, press the Oven
Light pad to turn the oven light on or off. A beep will sound
every time the Oven Light pad is touched.
To adjust the thermostat:
1.Press the Bake pad.
2.Enter 500 ° by pressing the number pads "5, O, 0".
3. Press and hold the Bake pad for several seconds until 00 °
appears in the display.
If the oven temperature was previously adjusted, the
change will be displayed. For example, if the oven
tem- perature was reduced by 15 °, the display will show
15 °
Oven Vent
When the oven is in use, the area near the oven vent may
feel warm to the touch. Do not block the vent opening for
best baking results.
The oven vent is located below the control panel on your wall
oven.
4.Press the appropriate number pads to select the tempera-
ture change desired.
The oven temperature can be increased up to 35 ° (+35 °)
or reduced by as much as 35 ° (-35 °) in 5 ° increments.
Pressing the Broil pad will change the - sign to a
positive number or back to a negative number.
5.The oven will now bake at the adjusted temperature. It is
not necessary to readjust the oven temperature if there is a
power interruption. This adjustment will not affect broil
or clean temperatures.
NOTE: Do not change the temperature setting more than
10° at a time before testing the oven.