Lexmark 7100 series User Manual page 10

7100 Series All-In-One User's Guide
fax cover page
Changing
information that
appears on yourfax
cover page
Scanning
Scanning multiple
pages or images
Scanning to an
application
E-mailing a scanned
image or document
Scanning photos
Editing scanned
images
Scanning
documents to edit
text
Scanning to your
computer over a
network
Printing
Printing a document
Printing collated
copies of your
document
Printing more than
one page on a sheet
of paper
Printing an image
as a multi-page
poster
Printing last page
first
Printing a banner
Printing repeating
images
htt_://_v lexnmrk com'publicationsipd fsi7100ien
2. Choose the correct control panel for your language.
3. Position the clips on the All-In-One, and then press down.
Note: See Using the control panel for information about
each of the buttons.
Setting up the All-In-One with
equipment
You can also connect your All-In-One with equipment, such as a
telephone, an answering machine, or a computer modem. If problems
occur, see Setup troubleshooting.
Note: The Lexmark
TM
7100 Series All-In-One is an analog
device that works best when directly connected to the wall
jack. Other devices (such as a telephone or answering
machine) can be successfully attached to pass through the All-
In-One, as described in the setup steps. If you want a digital
connection such as ISDN, DSL, or ADSL, a third-party device
is required.
'tiameset html (3 of 9)7/10/2008 7:46:13 AM