Lexmark 7100 series User Manual page 15

7100 Series All-In-One User's Guide
htt_://_a=v_v lexnmrk con,'publicationsipd fsi7100ien
,
2,
3,
4,
Connect a phone cord from the LINE port on the All-In-One to
the telephone wall jack.
Remove the protective plug from the EXT port on the back of the
All-In-One.
Connect a phone cord from the telephone to the computer
modem.
Connect a phone cord from the computer modem to the EXT port
on the All-In-One.
Note: To receive soft copy faxes, the All-In-One Auto Answer
feature must be turned off.
Note: See Manually for a special setup option for manual
receive modes.
Using a PictBridge-enabled digital
camera
You can connect a PictBridge-enabted digital camera to your All-In-
One and use the buttons on the camera to select and print your
photos.
1, Insert one end of the USB cable that came with your PictBridge-
enabled digital camera into the PictBridge port on the front of the
All-In-One.
'iiameset html (8 of 9)7/10/2008 7:46:13 AM