Advertisement
OPERATION
KNOW YOUR TRACTOR
READ THIS OWNER'S
MANUAL
AND SAFETY
RULES BEFORE
OPERATING
YOUR TRACTOR
Compare
the illustrations
with your tractor
to familiarize
yourself
with the locations
of various
controls
and adjustments,
Save this manual
for future
reference,
03005
FIG. 13
Our tractors
conform
to the applicable
safety
standards
of the American
National
Standards
Institute,
(A) ATTACHMENT
LIFT LEVER - Used to raise and lower the
mower or other attachments
mounted to your tractor.
(B) BRAKE PEDAL - Used for braking the tractor and starting
the engine.
(C) PARKING BRAKE - Locks clutch/brake
pedal into the
brake position.
(D) THROTTLE CONTROL - Used to control engine speed.
(E) ATTACHMENT
CLUTCH SWITCH - Used to engage the
mower blades, or other attachments
mounted to your tractor.
(F) IGNITION SWITCH - Used for starting and stopping the
engine.
(G) REVERSE OPERATION SYSTEM (ROS) "ON" POSITION
- Allows operation of mower or other powered attachment
while in reverse.
(H) LIGHT SWITCH - Turns the headlights on and off.
(J) CRUISE CONTROL
LEVER - Used to set forward
movement of tractor at desired speed without holding the
forward drive pedal.
(K) FORWARD DRIVE PEDAL - Used for forward movement
of tractor.
(L) REVERSE DRIVE PEDAL - Used for reverse movement of
tractor.
(M) FREEWHEEL
CONTROL-
Disengages transmission for
pushing or slowly towing the tractor with the engine off.
(N) CHOKE CONTROL - Used when starting a cold engine.
(P) SERVICE REMINDER / HOUR METER - Indicates when
service is required for the engine and mower.
(Q) 12-VOLT POWER PORT-
Used for 12-volt accessories.
11
Advertisement
