Husqvarna YTH2348 Owner's Manual
  1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Lawn Mower
  5. YTH2348 240440
  6. Owner's manual

Husqvarna YTH2348 Owner's Manual

917.287561
Hide thumbs Also See for YTH2348:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
Husqvarna
91 7.287561
(YTH2348)
Owner's
Manual

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna YTH2348

Summary of Contents for Husqvarna YTH2348

  • Page 1 Husqvarna 91 7.287561 (YTH2348) Owner's Manual...
  • Page 2 SAFETY RULES & Safe Operation Practices for Ride-On Mowers DANGER: THIS CUTTING MACHINE iS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT iN SERIOUS iNJURY OR DEATH. Do not operate machine without the entire grass catcher, discharge guard, or other safety devices in place and cidental starting...
  • Page 3 SAFETY RULES Safe Operation Practices for Ride-On Mowers Ill, CHILDREN GENERAL SERVICE Tragic accidents can occur if the operator is not alert to Never operate machine in a closed area. Keep all nuts and bolts tight to be sure the equipment the presence of children.

  • Page 4: Specifications

    PRODUCT SPECiFiCATiONS CUSTOMER RESPONSIBILITIES Gasoline Capacity 3,0 Gallons Read and observe the safety rules. and type: Unleaded Regular Follow a regular schedule in maintaining, caring for Oil Type (API-SG-SL): SAE 30 (above 32F) and using your tractor. SAE 5W-30 (below 32°F) Follow the instructions under "Maintenance"...
  • Page 5 UNASSEMBLED PARTS Slope Sheet (2) Keys ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. (See Fig. 2) ADJUST SEAT When right or left hand is mentioned in this manual, it means Sit in seat.
  • Page 6 ASSEMBLY ,/CHECKLIST CHECKTIREPRESSURE BEFORE YOU OPERATE YOUR NEW TRACTOR, WE The tires on your tractor were overinflated at the factory WISH TO ASSURE THAT YOU RECEIVE THE BES T PER- for shipping purposes. Correct tire pressure is important FORMANCEAND SATISFACTION FROM THIS QUALITY for best cutting performance.
  • Page 7 OPERATION These symbols may appear on your tractor or in literature supplied with the product, Learn and understand their mean- ing. REVERSE NEUTRAL HiGH CHOKE FAST SLOW iGNiTiON SWITCH MOWER LiFT ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT OPERATION...
  • Page 8 OPERATION KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. FIG. 3 Our tractors conform to the applicable safety standards of the American National Standards Institute.
  • Page 9 OPERATION _afety glasses or a wide vision safety mask worn over spectacles. HOW TO USE YOUR TRACTOR iMPORTANT: Leaving the ignition switch in any position other than "STOP" will cause the battery to discharge and go dead. BRAKE(See Fig. 4) TO SET PARKING NOTE:...
  • Page 10 OPERATION NOTE: Adjust gauge wheels with tractor on a flat level surface. Adjust mower to desired cutting height (See "TO AD- JUST MOWER CUTTING HEIGHT" in this section of manual). With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground.
  • Page 11 OPERATION _WARNING: Backing up with the attachment clutch en- Transmission Engaged gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged.
  • Page 12 OPERATION Release the parking brake and let the brake slowly CAUTION: Alcohol blended fuels (called gasohol return to operating position. or using ethanol or methanol) can attract moisture Allow one minute for transmission to warm up. This which leads to separation and formation of acids can be done during the engine warm up period.
  • Page 13 OPERATION MOWING TIPS Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. The left hand side of mower should be used for trim- ming. Drive so that clippings are discharged onto the area that has been cut.
  • Page 14 MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH SEASON STORAGE SCHEDULE HOURS HOURS HOURS HOURS v" Check Brake Operation Check Tire Pressure Presence & ROS Check Operator Systems v" Check for Loose Fasteners Lubrication Chart Check Battery Level Clean Batte_ and Terminals Check Transaxle Cooling Check Mower Levelness...
  • Page 15 MAINTENANCE TRACTOR Always observe safety rules when performing any main- blade approved by the manufacturer of tenance. your tractor. Using a blade not approved CAUTION: Use only a replacement BRAKE OPERATION by the manufacturer of your tractor is hazardous, could damage your tractor If tractor requires more than five (5) feet to stop at highest and void your warranty, speed in highest gear on a level, dry concrete or paved...

  • Page 16: Maintenance

    MAINTENANCE TO CHANGE ENGINE OIL (See Figs. 14 and 15) V-BELTS Determine temperature range expected before oil change. Check V-belts for deterioration and wear after 100 hours All oil must meet API service classification SG-SL. of operation and replace if necessary. The belts are not Be sure tractor is on level surface.
  • Page 17 MAINTENANCE MUFFLER CLAMP Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or dam- age. FUEL FILTER ..SPARK PLUGS FiG. 16 Replace spark plugs at the beginning of each mowing season or after every I00 hours of operation, whichever CLEANING occurs first.

  • Page 18: To Remove/Install Mower

    SERVICE AND ADJUSTMENTS WARNING: TO AVOID SERIOUS iNJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS: Depress brake pedal fully and set parking brake. Place attachment clutch in "DISENGAGED" position. Turn ignition key to "STOP" and remove key. Make sure the blades and all moving parts have completely stopped.
  • Page 19 SERVICE AND ADJUSTMENTS f ..-7 FIG. 20 ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring. Repeat on opposite side of tractor. ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and...
  • Page 20 SERVICE AND ADJUSTMENTS Disengage belt tension rod (K) from locking bracket (L). Install belt onto engine clutch pulley (M), IMPORTANT: Check belt for proper routing in all mower pulley grooves, FIG. 23 Engage beit tension rod (K) on locking bracket (L), loaded.
  • Page 21 SERVICE AND ADJUSTMENTS TO LEVEL MOWER Make sure tires are properly inflated to the PSi shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

  • Page 22: To Replace Mower Blade Drive Belt

    SERVICE AND ADJUSTMENTS TO REPLACE MOWER BLADE DRIVE BELT MOWER DRIVE BELT INSTALLATION Install belt around all mandrel pulleys (R) and around (SEE FiG, 29) idler pulleys (V) as shown. MOWER DRIVE BELT REMOVAL Install belt onto electric clutch pulley (M). Park tractor on a level surface.

  • Page 23: To Replace Motion Drive Belt

    SERVICE AND ADJUSTMENTS TO CHECK BRAKE TO REPLACE MOTION DRIVE BELT If tractor requires more than five (5) feet to stop at highest (See Fig. 30) speed in highest gear on a level, dry concrete or paved Park the tractor on level surface. Engage parking brake.
  • Page 24 SERVICE AND ADJUSTMENTS TO START ENGINE WiTH A WEAK BATTERY (See Fig, Negative (Black) Cable WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries. If your battery is too weak to start the engine, it should be recharged.
  • Page 25 STORAGE ENGINE ENGINE TO ADJUST THROTTLE CONTROL CABLE FUEL SYSTEM IMPORTANT: IT IS IMPORTANTTO PREVENTGUM DEPOSITS The throttle control has been preset at the factory and FROM FORMING IN ESSENTIAL FUELSYSTEM PARTS SUCH adjustment should not be necessary. ]f adjustment is nec- AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK essary, see engine manual.
  • Page 26 TROUBLESHOOTING POINTS PROBLEM CAUSE CORRECTION Wilt not 8tart Out of fuel Fill fuel tank. Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start Bad spark plug. Replace spark plug. Weak or dead battery.
  • Page 27 LESH OOTING POINTS PROBLEM CAUSE CORRECTION Engine dies when Reverse operation system Turn ignition key to tractor i8 chifted (ROS) is not "ON" while ROS "ON" position into rever¢e mower or other attachment See Operation section is engaged. Engine continue8 to run Faulty operator-safety presence control system.
  • Page 28 TRACTOR - - MODEL NUMBER YTH2348 (287561) DECALS PART PART DESCRIPTION DESCRIPTION 532 13 80-47 Decal, Battery 532 41 16-58 Decal, Operators 532 17 05-63 Decal, Warning 532 40 28-32 Decal, Hood 532 17 85-02 Decal, Mower Caution 532 4t 00-55 Decal, Hood Panel SD 532 19 87-85 Decal, Mower V-Belt Schematic 532 40 21-28 Decal, Hood Top Insert 532 16 69-60 Decal, Bypass...
  • Page 29 TRACTOR - - MODEL NUMBER YTH2348 (287561) SCHEMATIC $CH12 ÷Ill-- BATTERY SOLE\'O[D .................."4 ST&RTER _MIvETER FLSE <oP=o_> , { _ (.> ../,,_'L_ PTO SWITCH a_r_ " O,..REVERSE SWITCH (NOT P(REVERSE) SHORT_O CONNECTOR I ( HASSI =HARNESS _(-, SPAR;,: IONITION "PLUGS...
  • Page 30 TRACTOR - - MODEL NUMBER Y'rH2348 (287561) ELECTRICAL T11S 26" With 12V Outlet Option 71\• With Service Minder Option...
  • Page 31 TRACTOR - - MODEL NUMBER Y'rH2348 (287561) ELECTRICAL PART DESCRIPTION 532 14 49-27 Battery 874 76 04-12 Bolt Hex Head 1/4-20 x 3/4 532 18 64-91 Box Battery 532 17 61-38 Switch Interlock Push-In 532 18 37-59 Harness Socket Light W/4152J 532 00 41-52 Bulb Light 532 40 02-53 Cable Brty 532 41 28-95 Cable Starter...
  • Page 32 TRACTOR - - MODEL NUMBER YTH2348 (287561) CHASSIS Please contact AGRIFAB at 1 866 576 8388 for these parts 48274 BUMPER* .238 _137 j_176 _205 _175 176-_" chassis-tex TEX GT HUSQ...
  • Page 33 TRACTOR - - MODEL NUMBER YTH2348 (287561) CHASSIS PART DESCRIPTION 532 40 50-12 Logo 532 40 87-01 Dash 53241 10-46 Hood 532 19 89-07 Lens LH 532 40 86-07 Grille Asm, 532 19 89-06 Lens RH 532 19 81-25 Plate Engine 8170605-12 Screw 5/16-18 ×...

  • Page 34: Assembly Drive

    TRACTOR - - MODEL NUMBER YTH2348 (287561) DRIVE _125 drive-tex K46 pedal 8 rl...
  • Page 35 TRACTOR - - MODEL NUMBER YTH2348 (287561) DRIVE PART PART DESCRIPTION DESCRIPTION 872 11 06-16 532 40 53-84 TransaxIe, TUFFTORQ K46 BT Bolt RDHD SQNK 3/8-16 unc x 2 532 13 70-57 (See Transaxle breakdown) Spacer Split 5324031-18 532 12 35-83 Key Handle Parking Brake 872 11 06-20 819 13 13-16 Washer 13/32 x 13/16 x 16 Ga.
  • Page 36 TRACTOR - - MODEL NUMBER YTH2348 (287561) ENGINE 31-\ l SPARK ARRESTER KiT j engine-tex 11-vgt...
  • Page 37 TRACTOR - - MODEL NUMBER YTH2348 (287561) ENGINE PART DESCRIPTION Engine B&S Model No. 445577 0755-B1 (See Breakdown) 532 14 97-23 Muffler 532 19 43-20 Keeper Belt Engine 532 40 00-08 Clutch Ogura 532 40 50-97 Pulley Engine 532 40 00-21 Tank Fuel 532 19 42-67 Cap Asm...
  • Page 38 TRACTOR - - MODEL NUMBER YTH2348 (287561) STEERING ASSEMBLY • s_eeringqex 4-husq PART PART DESCRIPTION DESCRIPTION 532 19 39-43 Wheel, Steering 873 94 08-00 Nut Hex Jam Toplock 1/2-20 unf 89-67 Washer Hardened .793 x t .637 x .060 532 19 59-68 Axle Asm., Front 532 t8 532 40 30-87...
  • Page 39 TRACTOR - - MODEL NUMBER YTH2348 (287561) SEAT ASSEMBLY seat-rex 6.5SL PART PART DESCRIPTION DESCRIPTION 532 19 76-61 Handle Slide Seat 532 40 66-21 Seat 532 18 01-66 Bracket Pivot Fender 532 I9 82-00 Spring Latch Seat 8747606-12 Bolt Fin Hex 3/8-16 unc x 3/4 532 14 06-75 Strap, Asm Fender 873 80 06-00 Nut, Lock W/Ins.
  • Page 40 TRACTOR - - MODEL NUMBER YTH2348 (287561) MOWER DECK 48 Deck tex 3 rl...
  • Page 41 TRACTOR - - MODEL NUMBER YTH2348 (287561) MOWER DECK PART PART DESCRIPTION DESCRIPTION 532 40 35-82 Deck Weldment Mower 532 19 73-79 Pulley Idler 4.50 Raw 532 19 72-48 Cover Mandrel LH 873 90 06-00 Nut, Lock Fig. 3/8-16 unc 532 19 91-02 Cover Mandrel RH 817 49 06-36 Screw 3/8-t6 x t-1/4 unc...
  • Page 42 TRACTOR - - MODEL NUMBER YTH2348 (287561) MOWER LIFT...
  • Page 43 TRACTOR - - MODEL NUMBER YTH2348 (287561) MOWER LIFT PART DESCRIPTION 532 19 52-23 Shaft Asm., Lift 532 19 52-3 t Lever Asm., Lift Rh 532 41 15-55 Grip, Lever 5321963-14 Spring Torsion 532 19 42-09 Pin Cotter 7/16 Bow Tie Lock 532 19 53-03 Spring Lift Assist 819 19 19-12...
  • Page 44 TRACTOR - - MODEL NUMBER 'YTH2348 (287561) TUFFTORQ TRANSAXLE MODEL NUMBER K46BT MODEL K46BT 7A646084180 ACTUAL PARTS MAY NOT APPEAR AS SHOWN _"I f--82...
  • Page 45 TRACTOR = - MODEL NUMBER 'YTH2348 (287561) TUFFTORQ TRANSAXLE MODEL NUMBER K46BT PART DESCRIPTION 414395 VENT VALVE 15 414396 MAGNET 414397 MAGNET HOLDER 415923 PUMP SHAFT/BEARING 414398 BYPASS LEVER 414399 SEALING CAP 30 414400 SNAP RING 035 414401 O-RING 1A P10A 414402 SEAL TC 153507 414403...
  • Page 46 TRACTOR = - MODEL NUMBER YTH2348 (287561) BRIGGS ENGINE - MODEL NUMBER 445577, TYPE NUMBER 0755-B1 213_ 267g 188_ iOPERATOR'S MANUAL...
  • Page 47 TRACTOR - - MODEL NUMBER YTH2348 (287561) BRIGGS ENGINE - MODEL NUMBER 445577, TYPE NUMBER 0755-B1 1022 1029_ 635 _ 1022_ 121 CARBURETOR OVERHAUL 2760 1124£_@ 150[_ 104 _ 137_ 967@ 633® 672_ 10s®1123_ 358 ENGINE GASKET 1329 REPLACEMENT ENGINE [ 1330 REPAIR MANUAL...
  • Page 48 TRACTOR - = MODEL NUMBER YTH2348 (287561) BRIGGS ENGINE - MODEL NUMBER 445577, TYPE NUMBER 0755-B1 552 Q _405 552A8 404 _ 552A 8 691 ÷ 1119_' 165_...
  • Page 49 TRACTOR - - MODEL NUMBER YTH2348 (287561) BRIGGS ENGINE - MODEL NUMBER 445577, TYPE NUMBER 0755-B1 PART PART DESCRIPTION DESCRIPTION Kit-Carburetor Overhaul 699753 Cylinder Assembly 792455 Carburetor 499585 Kit-Bushing/Seal 699709 Valve-Throttle (Magneto Side) 690993 Kit-Throttle Shaft 391686s, Seat-Oil (Magneto Side) 499805 Float-Carburetor 699747...
  • Page 50 TRACTOR =- MODEL NUMBER YTH2348 (287561) BRIGGS ENGINE - MODEL NUMBER 445577, TYPE NUMBER 0755-B1 PART PART DESCRIPTION DESCRIPTION 499486s Filter-Air Cleaner Cartridge 865A 793205 Cover-Air Guide (Cylinder 2) Cover-Air Guide 691003 Screw (Air Guide Cover) 865B 691015 447A Seal-Valve 69I 108 Screw (Air Guide Cover) 690968 *+...
  • Page 51 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. WARNING: To avoid serious injury, operate your tractor up and down the face of slopes, never across the face. Do not mow slopes greater than 15 degrees.
  • Page 52 (4) Lawn and garden attachments are covered by a third party which gives a warranty, all claims for warranty should be sent Husqvarna Forest & Garden Company ("Husqvarna') warrants Husqvarna product to the original purchaser to be free from "4 to the manufacturer, defects in material and workmanship from the date of purchase for the "Warranty PeriacPof the product as set forth below:...

This manual is also suitable for:

917.287561

Table of Contents