Hoover Twin Chamber Service Instructions Manual page 7

J. Hood
1. Remove height adjustment lever.
Height Adj Lever
2. Remove four screws as illustrated
K. Headlight
1. Remove hood.
2. Remove bulb by pulling straight out of socket; push
new bulb into socket until it locks in place.
L. Bottom Plate
1. Turn cleaner upside down.
2. Remove four screws securing bottom plate.
3, Lift bottom plate up and off of unit.
M. Agitator / Belt
1. Remove bottom plate,
2. Lift agitator out of housing and slide agitator out from
belt.
3. Remove belt from around motor shaft.
N. Front Wheel Assembly
1, Remove cam actuator spring from the front wheel
support retaining boss and remove by pulling out of the
main body retention pocket.
2. Pivot front wheel assembly upward and slide from
retaining slots in main body.
0410o 149 E -7