Disassembly - Hoover Twin Chamber Service Instructions Manual

III. Disassembly
A. Twin Chamber
TM
Dirt Cup Assembly
1. Remove Dirt Cup Assembly by lifting Dirt Cup Latch
and sliding Dirt Cup out of position as illustrated.
\
\
2. To remove the Pre-Filter and HEPA filter putt straight
upward on the Pre-Filter Assembly while slightly flexing
the dirt cup outward as shown.
B. Tool Rack
1. To remove Tool Rack, remove screw as illustrated and
slide tool rack up and off of cleaner.
C. Handle Cover I Handle Cover Rear
t. To remove the Handle Cover Rear remove 2 screws
as illustrated.
2. Remove Handle Cover Rear by pivoting top of Cover
backwards and lifting out of place.
3. Remove 2 screws holding Handle Cover in place as
shown.
04100 149 E -4