Hoover Twin Chamber Service Instructions Manual page 5

4. To remove handle cover, pry handle cover as shown
and pull forward out of position.
D. Dirt Cup Latch
t. Remove 2 screws as illustrated and pull Dirt Cup
Latch straight forward and off of Upper Handle
Assembly.
E. Upper Handle Assembly
1. Pry out ward on back panel of Upper Handle to
release tabs on back of handle as shown. While prying
)ull handle up to release from cleaner.
F. Lower Handle I Attachment Cord
1. To replace Attachment Cord, once the Upper Handle
has been removed, the strain relief can be lifted out of
_osition.
Note routing of cord through hook at top of handle.
2. Remove bolt located as shown so that Lower Handle
can be removed. Once the bolt has been removed the
Handle can be pulled straight up and off of the cleaner.
04/00 14 €, E-5