Hitachi 60FX32B Operating Manual page 4

SAFETY TIPS
PROTECTION AND LOCATION OF YOUR SET
16-1. If an outside antenna is connected to the television set, be sure the
antenna system is grounded so as to provide some protection
against voltage surges and built up static charges, Section 810 of
the Nafiona_ Electrical Code, NFPA No. 70-1975, provides informa-
tion with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna discharge
unit connection to grounding electrode, and requirements for the
grcunding electrode.
ct_
_SC_CE UNIT
I_EC S ECI_3_
_1o-_
OUNOI_G CO_CTO_S
(_C SEOTIO_ _1_-Zl)
CRC_NO_G CO_:TC_tS
_R SER,aC_ _ROUNO_G
_ E_ECTROOE SYSTEM
(NEC ,V_T 2 _P_TH}
NEC "_T;O_. E tECTR_C_ COOE
16-2.
17.
Note to CATV system installer:
(Only for television sets with CATV reception)
This reminder is provided to call CA'rV system
installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of cable entry
as practical.
An outside antenna system should not be locat-
ed in the vicinity of overhead power lines or other
electrical lights or power circuits, or where it can
fall into such power lines or circuits When
installing an oulside antenna system, extreme
care should be taken to keep from touching such
power lines or circuits as contact with lhern might
be fatal.
18. For added protection for the television set during
a lightning stom_, or when it is left unattended
and unused for long periods of time, unplug it
from the wall outlet and disconnect an!:enna.
This will prevent damage due to lightning and
power-line surges.
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL
CODE INSTRUCTIONS.
OPERATION OF YOUR SET 2O.
19. This television set should be operated only from
the type of power source indicated on the marking
label If you are not sure of the type of power sup-
ply at your home, consult your television dealer or
local power company. For television sets
designed to operate from battery power; refer to
the operating instructions
21.
If the television set does not operate normally by
following the operating instructions, unphJg the
television set from the wall outlet and refer ser-
vicing to qualified service personnel, Adjust only
those controls that are covered in the operating
instructions as improper adjustment of other con-
trois may result in damage and will often require
extensive work by a qualified technic, an to
restore the television set to normal operation.
If your television set is to remain unused for a
period of time. (such as when going on a holiday),
turn the television set OFF and unplug it from the
wall outlet.
IF THE SET DOES NOT OPERATE PROPERLY
22 If you are unable to restore normal operation by
following the detailed procedure in your operating
instructions, do not attempt any further adjust-
m_nts Unplug the set and call your dealer or ser-
vice technician
23. Whenever the television set is damaged or fails.
or if there is a distinct change in performance
that indicates a need for service, unplug :he set
and have it checked by a professional service
technician.
24 It is normal for some television sets to make
occasional snapping or popping sounds, particu-
lady when being turned on or off. If the snapping
or popping is continuous or frequent, unplug the
set and consult your dealer or service technician
FOR SERVICING AND MODIFICATION
25, Do not use attachments not recommended by the
television set manufacturer as they may cause
hazards.
26. When replacement paris are required, be sure the
ser/ice technician has used replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
27 Upon completion of any service or repairs to the
television set, ask the service technician to per-
form routine safety checks to determine that the
television is in safe operating condition.