Hitachi 53UWX10BA Operating Manual
Hitachi 53UWX10BA Operating Manual

Hitachi 53UWX10BA Operating Manual

Projection color tv
Hide thumbs Also See for 53UWX10BA:

Advertisement

PROJECTION COLOR TV
61SWX10B
61SWX12B
53SWX10B
53SWX12B
OPERATING GUIDE
VIDEO
SETUP
CUSTOMIZE
SEL
As an E
NERGY
product meets the E
THEATER
AUDIO
TAR ®
S
Partner, Hitachi, Ltd. has determined that this
TAR ®
S
guidelines for energy efficiency.
NERGY
IMPORTANT SAFETY INSTRUCTIONS
FIRST TIME USE
THE GENIUS
REMOTE CONTROL
ULTRATEC BIT-MAP
ON-SCREEN DISPLAY
USEFUL INFORMATION INDEX
53UWX10BA
61UWX10BA
43UWX10B
2-4
5-22
23-35
36-70
71-75

Advertisement

Table of Contents
loading

Summary of Contents for Hitachi 53UWX10BA

  • Page 1 53SWX12B OPERATING GUIDE VIDEO THEATER SETUP CUSTOMIZE AUDIO TAR ® As an E Partner, Hitachi, Ltd. has determined that this NERGY product meets the E NERGY IMPORTANT SAFETY INSTRUCTIONS FIRST TIME USE THE GENIUS REMOTE CONTROL ULTRATEC BIT-MAP ON-SCREEN DISPLAY USEFUL INFORMATION INDEX TAR ®...
  • Page 2: Power Source

    HITACHI could void the user’s warranty. The FCC requires the user to be notified that any changes or modifications made to this device that MODIFICATIONS: are not expressly approved by Hitachi America, Ltd. Home Electronics Division may void the user’s warranty. POWER SOURCE This projection television is designed to operate on 120 Volts 60Hz, AC current.
  • Page 3: Important Safety Instructions

    Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety tips which will be of benefit to you. Please read it carefully and apply the knowledge you obtain from it to the proper operation of your HITACHI television.
  • Page 4: Picture Cautions

    Continuous on-screen displays such as video games, stock market quotations, computer generated graphics, and other fixed (non-moving) patterns can cause permanent damage to projection television receivers. BURNS” constitute misuse and are NOT COVERED by your HITACHI Factory Warranty. • When using Picture-in-Picture function, the sub-picture should not be left permanently in one corner of the screen or a “PATTERN BURN”...
  • Page 5: Remote Control Battery Installation And Replacement

    CAUTION: Television stand model SP-43W is designed for use with a 43 inch or smaller television set. Use of a smaller stand, a non Hitachi recommended stand or a generic stand may result in instability, causing possible injury. 1. Remote Control Unit CLU-5711TSI (Part No. HL01641), or Remote Control Unit CLU-5713TSI (Part No.
  • Page 6: How To Set Up Your New Hitachi Projection Tv

    VIEWING The major benefit of the HITACHI Projection Television is its large viewing screen. To see this large screen at its best, test various locations in the room to find the optimum spot for viewing.
  • Page 7: Hook-Up Cables And Connectors

    HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
  • Page 8: Front View

    Models: 61UWX10BA, 53UWX10BA, 43UWX10B POWER PUSH INPUT MENU VOL- EXIT SELECT INPUT 3 L/MONO S-VIDEO VIDEO AUDIO MENU/SELECT button This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
  • Page 9 NOTES: 1. Your HITACHI Projection TV will appear to be turned OFF if there is no video input when VIDEO: 1, 2, 3, 4 or 5 is selected. Check the Power Light to make sure the TV is turned off when not in use.
  • Page 10: Front Panel Jacks And Connections

    The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal.
  • Page 11: Rear Panel Jacks

    REAR PANEL JACKS Models: 61UWX10BA, 53UWX10BA, 43UWX10B ANT A CONVERTER S-VIDEO S-VIDEO ANT B VIDEO Y/VIDEO VIDEO (MONO) (MONO) AUDIO TO HI-FI AUDIO AUDIO INPUT 1 INPUT 2 INPUT 4 Antenna Input/Output The remote control allows you to switch between two separate 75-Ohm RF antenna inputs, ANT A and ANT B. ANT A input can be displayed as a main picture or sub-picture.
  • Page 12 Component: Y-P Inputs Inputs 4 and 5 provide Y-P jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use standard video signal for INPUT:4 and 5. Items are for 53/61SWX10B and 53/61SWX12B only. REAR SPEAKER Output Terminals These terminals are used to connect external speakers, which are used for the surround sound feature.
  • Page 13: Rear Panel Connections

    REAR PANEL CONNECTIONS (43UWX10B and 53/61UWX10BA MODELS) Outside antenna or cable TV coaxial cable 2-Way signal splitter INPUT Stereo System Amplifier NOTE: Connect only 1 component to each input jack. Follow connections that pertain to your personal entertainment system. Standard video signal (composite video) can be input to all video inputs. (Video 1 ~ VIdeo 5). TYPICAL FULL-FEATURE SETUP VCR #1 OUTPUT...
  • Page 14: First Time Use

    (53/61SWX10B AND 53/61SWX12B MODELS) Outside antenna or cable TV coaxial cable 2-Way signal splitter Surround Speakers connections on page 15 INPUT Stereo System Amplifier INPUT Sub Woofer NOTE: Connect only 1 component to each input jack. Follow connections that pertain to your personal entertainment system. Standard video signal (composite video) can be input to all video inputs.
  • Page 15: Rear Speaker Terminal Connections

    REAR SPEAKER TERMINAL CONNECTIONS CONNECT AFTER TURNING THE POWER TO THE TV OFF. (Rear speaker connection applies to SWX model only) Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place.
  • Page 16: Connecting External Audio Amplifier

    CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. Models: 61UWX10BA, 53UWX10BA, 43UWX10B ANT A CONVERTER S-VIDEO S-VIDEO ANT B VIDEO VIDEO Y/VIDEO (MONO) (MONO)
  • Page 17 FIRST TIME USE Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Match the numbers below to the diagrams for speaker placement and refer to the table on page 18 for the different surround sound requirements. (See pages 65-67 for SURROUND functions.) The television’s internal speakers. The television’s internal center channel speaker, which is on only when the television is in SURROUND-STADIUM, SURROUND- ROCK ARENA, SURROUND-JAZZ CLUB, SURROUND-PRO LOGIC, or SURROUND-DOLBY DIGITAL mode.
  • Page 18 Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B SURROUND REQUIRED FEATURE CONNECTION STADIUM ROCK ARENA JAZZ CLUB DOLBY PRO LOGIC DOLBY DIGITAL When left and right speakers are connected ( channels. The center channel audio will be heard from ( OPTIONAL CONNECTION Receive mono and stereo sound. Listener has feeling of being at a stadium.
  • Page 19: Connecting External Video Sources

    Press the VID1~VID5 button to view the program from the VCR or the laserdisc player. The VIDEO mode disappears automatically after approximately eight seconds. Press the ANT button to return to the previous channel. Models: 61UWX10BA, 53UWX10BA, 43UWX10B ANT A CONVERTER...
  • Page 20 Press the VID1~VID5 button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after approximately eight seconds. Press the ANT button to return to the previous channel. Models: 61UWX10BA, 53UWX10BA, 43UWX10B ANT A CONVERTER...
  • Page 21 Press the VID1~VID3 button to view the program from the VCR or laserdisc player. The VIDEO icon disappears automatically after approximately eight seconds. Press the ANT button to return to the previous channel. Models: 61UWX10BA, 53UWX10BA, 43UWX10B ANT A CONVERTER...
  • Page 22 Press the VID4~VID5 button, to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO icon disappears automatically after approximately eight seconds. Press the ANT button to return to the previous channel. Models: 61UWX10BA, 53UWX10BA, 43UWX10B Hitachi Model or OUTPUT...
  • Page 23: The Genius Remote Control

    THE GENIUS REMOTE CONTROL In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one touch.
  • Page 24: How To Use The Genius Remote To Control Your Tv

    HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV POWER SOURCE WIZARD SLEEP LAST CH HELP SELECT PIP CH FREEZE PIP ACCESS SWAP PIP MODE TV/VCR PROG SLOW CLU-5711TSI POWER button Press this button to turn the TV set on or off when the remote is in TV mode. (See page 23 for instructions on how to set the remote control to TV mode.) TV button When the TV button is pressed, it will blink, to indicate the remote is in TV mode.
  • Page 25 HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV AV1, AV2, AV3, or CD, TAPE, AMP buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video mode. (see page 34) NOTE: Your remote control “SOURCE WIZARD” buttons are either labeled as “AV1, AV2 and AV3,” or “CD, TAPE, and AMP.” If your remote control “SOURCE WIZARD”...
  • Page 26 HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV THUMB STICK/SELECT button All the On-Screen Display features can be set or adjusted by using the THUMB STICK. The THUMB STICK will highlight functions or adjust and set different features. Press the THUMB STICK toward desired direction and press down to SELECT.
  • Page 27: Picture In Picture (Pip)

    PICTURE-IN-PICTURE (PIP) Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B).
  • Page 28 PICTURE-IN-PICTURE CONT. SPLIT MODE PIP Split Mode PIP displays the main picture and sub-picture evenly on the screen. Main Picture SURF MODE PIP This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along the right edge of the screen.
  • Page 29 PICTURE-IN-PICTURE (PIP) FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again.
  • Page 30: Using The Remote To Control Vcr Functions

    After replacing the batteries repeat the entire programming procedure as stated above. The MENU button will act as the VCR MENU button for HITACHI VCRs. The LAST CH button will act as your VCR ENTER button if required.
  • Page 31: Using The Remote To Control Cable Box Functions

    USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box. (refer to page 35) Turn ON your cable box.
  • Page 32 SET-TOP-BOX/SATELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver. This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set-top-box/satellite systems. (refer to page 35) Turn ON your set-top-box/satellite systems.
  • Page 33: Using The Remote To Control Dvd Functions

    USING THE REMOTE TO CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of your DVD player. (refer to page 35 for pre-codes) Turn ON your DVD player.
  • Page 34: Using The Remote

    TO CONTROL ADDITIONAL AUDIO/VIDEO EQUIPMENT Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. You must first program the remote to match the remote system of your Audio/Video component. (refer to page 35 for pre-codes) Turn ON your Audio/Video component you wish to control with the Remote.
  • Page 35 Focus ......52 Hitachi......12 Garrard .
  • Page 36: Ultratec Osd

    CUSTOMIZE AUDIO 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the THUMB STICK to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu.
  • Page 37 ULTRATEC OSD Set Menu Language Plug & Play Set Antenna/Cable SETUP Set Channel Memory Edit Channel Memory View Channel List Set The Clock Magic Focus Picture Formats Name The Channels Name The Inputs Set Favorite Ch. CUSTOMIZE Set Parental Locks Set Program Timer Video Input Sensor Closed Caption...
  • Page 38 SETUP Select SETUP when setting your TV up for the first time. Use the THUMB STICK SETUP the function desired. Use THUMB STICK to select the sub-menu of your choice. NOTE: To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds.
  • Page 39 SET UP This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer PLUG & PLAY three questions and a graphic will be displayed, showing you the optimum setup for your personalized system. VIDEO SETUP CUSTOMIZE...
  • Page 40 SETUP Select ANTENNA if you are using an indoor or outdoor antenna. Select CATV if you have cable TV. SET ANTENNA/CABLE VIDEO SETUP CUSTOMIZE AUDIO S et M en u L a n g u a ge P lu g & P la y S et An t enn a /Ca ble S et C ha n n e l Me m or y E di t C ha nn e l Me m or y...
  • Page 41 SET UP This feature will automatically store active TV channels in SET CHANNEL MEMORY. This will allow you SET CHANNEL MEMORY to skip unused channels when using CHANNEL UP ( ) or DOWN ( ). SETUP Press select to set Set Menu Language Plug &...
  • Page 42 SETUP Use this function after SET CHANNEL MEMORY is completed to add or erase additional channels to the EDIT CHANNEL MEMORY remote control CHANNEL SETUP VIDEO AUDIO CUSTOMIZE Se t M en u L a n g u a ge Pl u g &...
  • Page 43 SET UP This function allows you to review which channels are labeled in NAME THE CHANNEL, which have been VIEW CHANNEL LIST added to EDIT CHANNEL MEMORY (SCAN), and which are protected by SET PARENTAL LOCKS. SETUP VIDEO AUDIO THEATER CUSTOMIZE View C ha n ne l L is t A nt A...
  • Page 44: Set The Clock

    SETUP The time must be set before you can SET PROGRAM TIMER or TV TIME OUT. SET THE CLOCK SETUP To s et t im e S e t T he C l oc k - - - - Am J a n 01 2 0 0 1 M e n u To M e n u B a r To Q u i t...
  • Page 45 Please turn on your television for at least 20 minutes before using this feature. Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed.
  • Page 46 SETUP SETUP The PICTURE FORMATS function is very useful when setting up reception High Definition, Standard PICTURE FORMATS Definition and NTSC signals. SETUP Press Select To Set P i ctu r e F or m at s Ant A 6 Aspect Style Normal Full...
  • Page 47 SET UP ASPECT STYLE Fill This function allows you to select when receiving either NTSC or SDTV. Full screen picture is available in this mode when receiving letterbox signal. Both vertical edges will be hidden if you select Fill for ordinary 4:3 picture. Smooth Wide This function allows you to select when receiving either NTSC or SDTV signal.
  • Page 48 CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. CUSTOMIZE Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 NAME THE CHANNEL channels a name when CATV signal source is selected.
  • Page 49 CUSTOMIZE NAME THE INPUTS Use this feature to give a name to any of the five video inputs. VIDEO SETUP CUSTOMIZE AUDIO Na me th e Ch a n n e l Na me t h e I npu t s Se t F av or i t e Ch .
  • Page 50: Set Favorite Channels

    CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. SET FAVORITE A total of 36 channels can be stored in the FAVORITE CHANNELS function. CHANNELS SETUP CUSTOMIZE VIDEO N am e t he Ch a n ne l N am e t he In p u ts Se t F a vo rit e Ch.
  • Page 51: Favorite Channels

    CUSTOMIZE Use this function to display FAVORITE CHANNEL selections as sub-pictures or to tune the main picture to FAVORITE CHANNELS a desired favorite channel. (OPERATION) S e t Fa v o r ite Ch . THUMB STICK M e n u To S u r f M OVIE S M e n u...
  • Page 52 CUSTOMIZE This function will block out the picture and sound of the selected channel or video input. SET PARENTAL LOCKS It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter SET PARENTAL LOCKS is a four digit secret code number.
  • Page 53 CUSTOMIZE This function will automatically turn the TV on and off, one time only, every day, or once a week. SET PROGRAM TIMER CUSTOMIZE Press Select to Set Set Program Timer --:-- AM TV On --:-- AM TV Off Sun (Da y Of Week ) -- Chann el On ce D aily...
  • Page 54 CUSTOMIZE Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input. VIDEO INPUT SENSOR SETUP CUSTOMIZE VIDEO Na m e Th e Ch a nn el Na m e Th e In p uts Se t F avo r ite Ch .
  • Page 55 CUSTOMIZE Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video CLOSED CAPTION which are displayed on the TV screen. Your local TV program guide denotes these programs as SETUP VIDEO CUSTOMIZE N am e th e Ch a nn e l N am e th e In p uts S et F a vo r ite Ch .
  • Page 56 VIDEO Select VIDEO to adjust picture settings and improve picture quality. VIDEO SETUP THUMB STICK Con tr a st B r igh tne ss Col or T int S ha r p ne ss Rese t A dva nce d Se tting s M e n u Use the THUMB STICK...
  • Page 57 VIDEO Your HITACHI Projection TV has a PERFECT PICTURE function which will automatically adjust picture ADVANCED settings to produce the highest quality picture possible. SETTINGS When PERFECT PICTURE is highlighted, press down on THUMB STICK to turn the PERFECT PICTURE on or off.
  • Page 58 AUDIO Models: 61UWX10BA, 53UWX10BA, 43UWX10B Select AUDIO to adjust the TV to your preference and to improve the sound quality. AUDIO SETUP Ba s s THUMB T r e b le STICK Ba l a nc e Re s e t...
  • Page 59 AUDIO Models: 61UWX10BA, 53UWX10BA, 43UWX10B ADVANCED Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions. SETTINGS THUMB STICK AUDIO Press select to set A d v an ce d Se t t i n gs...
  • Page 60 AUDIO Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Select AUDIO to adjust the TV to your preference and to improve the sound quality. AUDIO SETUP THUMB STICK E qu a lizer Rese t A dva nce d S e tting s M e n u Use THUMB STICK to highlight the function to be adjusted.
  • Page 61 AUDIO Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B ADVANCED Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions. SETTINGS THUMB STICK AUDIO Press select to set A d va nc ed Set t i n gs St e r e o M on o S ec o nd A u d i o P ro g ra m...
  • Page 62 3:2 pulldown. When MOVIE MODE is selected from the THEATER menu, your Hitachi Projection Television will activate the circuitry for this special feature to improve video performance when watching film based sources. This 3:2 pulldown detection will only work in MOVIE MODE.
  • Page 63: Surround Off

    Based on the principles of the human hearing system, SRS technology delivers and exciting and realistic 3D Sound experience from just two external speakers (or) the two internal speakers of your HITACHI Television. If your HITACHI Television is connected to an external audio system, SRS will also create an incredible 3D sound experience from two speakers and even enhance a complete multi-speaker surround sound system.
  • Page 64 3:2 pulldown. When MOVIE MODE is selected from the THEATER menu, your Hitachi Projection Television will activate the circuitry for this special feature to improve video performance when watching film based sources. This 3:2 pulldown detection will only work in MOVIE MODE.
  • Page 65 THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B The following surround settings will reproduce the “live” sound you would hear in concert halls, SURROUND sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on audio system setup on pages 17-18. The surround system is most effective with movie and other stereo material that is Dolby Surround encoded.
  • Page 66: Dolby Pro Logic

    THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B DOLBY PRO LOGIC Dolby Pro Logic provides four separate sound channels: front left, center, front right, and surround. For properly encoded programs marked the center sound channel contains the dialogue for the program viewed. The left and right channels produce sound effects that will match the action on the TV screen.
  • Page 67: Dolby Digital

    THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B DOLBY DIGITAL Dolby Digital provides six independent sound channels: front left, center, front right, surround left, surround right, and sub woofer. Select this feature when viewing properly encoded programs marked To fully benefit from Dolby Digital Surround, it is recommended that the surround speaker system be complete, as shown on page 17.
  • Page 68: Input Source

    THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Set audio input to Digital or Analog. This fueature is used only when viewing VIDEO:4 or VIDEO:5 inputs, INPUT SOURCE since only these inputs can accept DIGITAL audio input. SETUP CUSTOMIZE VIDEO AUDIO T he a t er Mo de s Sur r o un d In p ut Sour ce L i s ten i n g...
  • Page 69 THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Choose between pre-set audio modes Standard, Night, or Maximum. Take advantage of these features to LISTENING MODE reduce or increase sound effects. SETUP VIDEO THEATER CUSTOMIZE AUDIO T hea te r M od es S ur r o un d I npu t So ur c e Li s te ni n g...
  • Page 70 THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Select specific speaker output, including a subwoofer. SPEAKER SETUP THEATER Press select to set S p ea ker Se t up F ro nt L /R I nt e rn al Ex t er n al w/ Am p Su r ro un d Ye s Su b W oo fe r...
  • Page 71: Care Of Your Hitachi Projection Tv And Your Remote Control

    CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty.
  • Page 72: Reception Problems

    NOTE: The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment from the TV set to a considerable distance. RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.
  • Page 73: Useful Info

    3. If there is still no power, unplug the power cord from the wall. Wait 30 seconds and plug the power cord back in. Press the power switch again. This protective technology should provide for years of lasting entertainment from your HITACHI Projection Television.
  • Page 74 Video .....1.0Vp-p. 75 Ohm • Audio ....470mVrms, 1k Ohm Dimensions: 53UWX10BA/ 53SWX10B/ 43UWX10B 53SWX12B •...
  • Page 75 Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico. Each facility will provide you with convenient and expedient assistance.
  • Page 76 QR48043...

Table of Contents