Remote Control - Hitachi 60FX32B Operating Manual

THE VCRPlus+ REMOTE CONTROL (CLU-43,WP)
In addition to controlling all the functions on your HITACHI Projection TV, the new remote is designed to operate dif-
ferent types of VCRs and CATV (Cable TV)/Satellite converters with one touch. Basic operation keys are grouped
together in one area.
To oper_,te your TV, point the remote at the remote sensor of the "IV and press the TV button on the remote. The
remote will now control your "IV.
To operate your VCR, point the remote at the remote sensor of the VCR, and press the VCR button on the remote.
The remote will now control your VCR. (See page 22 for instructions on how to program the remote to control your
VCR.)
To operate your Cable/Satellite Box, point the remote at the remote sensor of the cable/satellite box and press the
CABLE button on the remote. Tile remote will now control your cable/satellite box. (See page 23 for instr,Jcdons on
how to program the remote to control your cable/satellite box.)
TV 8:43 "M
WEEKLY ADO TIME
POWER _ TV CABLE VCR "I
Qt J
SU_EP
w >
HITACHI
®
Q
®,®
REMOTE CONTROL MODE BUTTONS
These buttons allow the remote to control _jour "IV,
VCR, or Cable Box depending on which mode is
chosen, as explained above.
LIGHT BUTTON
When you are in a dark room, press the light but-
ton (@) to light up the buttons shown in @. The
light will stay on for about 8 seconds if the light but-
ton is not pressed again. These buttons will not
appear to light if the room is too bright.
14
@ PRECODED VCRPlus+ BUTTONS
These buttons always transmit the chosen VCR
Plus+ codes.
®
®
CURSORNCR BUTTON
When the remote is in TV mode, these are the
Cursor buttons. When the remote is in VCR or
CABLE mode, these buttons transmit the, chosen
VCR codes.
This display allows you to view which mode the
remote control is in as well as the time. This is also
used to determine VCRPlus+ status. (See pages
22, 23, and 26 for more information.)