GE RN328 Owner's Manual And Installation Instructions page 8

Installation Instructions
DAMAGE - SHIPMENT/INSTALLATION
• If the mfit is dmnaged in shipment, return the unit to the
store in which it was bought for repair or replacement.
• If the refit is dmnaged by the customer, repair or
replacement is the responsibility of the customer;
• If the refit is dmnaged by the installer (if other than
the customer), repair or replacement must be made
by arrangement between customer and instnlle_:
MOUNTING SPACE
Bottomedgeof
cabinetneeds
to be 30" or
_] morefrom
the cooking
surface
66" or more
from the floor ___
to the top of __
the hood
NOTES:
• This range hood is for installation oxer ranoes or
cooktops up to. o Wl(le.
• If xou
are going to vent )our range hood to the
outside, see the "Ducting Requirements" section
for exhaust duct preparation.
TOOLS YOU WILL NEED
Flatbladeand Phillips
screwdrivers
Pencil
Duct tape
Saw (saber or keyhole) Electric drill Metal snips
(in some
applications)
1/4" pivoting Pliers Tape measure
hex socket
Wire stripper
Flashlight Caulking Level 1/4" Nutdriver
PARTS INCLUDED
PART
Grease Filteronly(JV338)
Charcoal Filteronly
(JN327andRN328)
Grease FilterandCharcoal
Filter(JV347, J V348andJV367)
MountingScrews
(8- 18x 3/4" Phillips panhead)
Exhaust A daptor
(for3X" x 10"rect.venting)
Exhaust A daptorScrew
(8- 18x 3/8 Phillipspanhead
or hexhead)
QUANTITY
1
1
2
4
1
1
8