Table of Contents
Advertisement
Read these instructions completeIF and carefu#y_
When All HookupsAre Complete
[]
Make sure all _ontrols are left in the OFF
position.
[]
Make sure tim flow of combustion and
ventilation air to the range is unobstructed.
Mobile HomeInstallation:
Be sure the installation of this range in a
manutacmred
or mobile home conli)m_s with the
Manufltcmred
Home ( onstmction
and Safely
Title 24 CFR, Pmt 3280 [ti)mmrly the Federal
Standard ti)r Mobile Home Construction
and
Salely Title 24, H.U.D. (Pmt 280)] or when such
standards me not applicable, the Smndmd ti)r
Manutitcmred
Home Installations 1984
(Manufitcmred
Home Sites Communities
and
Set-Ups), ANSI A225. l-latest edition, or with local
cocDs. In Canada, mobile home installation nmst
be in accordance with the cunent CAN/CSA
Z241!/MH Mobile Home Installation Code.
Model and SerialNumberLocation:
The serial plate lot y_Jm range is located under
the cooktop on the right side of the burner box.
In addition to the model and serial numbers, it
tells y{m the ratings of the burners and type offl_el
and pressure t_)r wlfich the range was a_!iusted
when it left the titcto_y.
When ordering parts, always include the model
number and serial number to ensure proper
replacement
pmts. Pmts m W be obtained
through General Electric/Hotpoint
Facto U
Seccice Centers or General Electric/Hotpoint
m_thorized (ustomer
Care <'sec_icers.
?3
Advertisement
Table of Contents
