Table of Contents
Advertisement
Installation of the range.
Read these instructions completely and carefully.
Protect YourFloor
Yourrange, like many other household items, is
heavy and can settle into soft floor coverings such as
cushioned vinyl or carpeting. When m(Mng tile
range on this type of flooring,
use cme, and it is
recommended
that these siinple and inexpensive
insU_ucfions be fi)llowed.
The range should
be installed
on a sheet of
pl)wood
(or similm material)
as fi)llows: When
the floor o)vering
ends at the fiont of the range,
the mea that the range will rest on should
be buih
up with pl)_vood
to the same level or higher
than
the floor o)vering.
This will all()w the range
u) be
m()ved tot cleaning
or servicing.
Installing the Backguard
[]
Pla(e the ba(kgu_ud
on top ofthe
end panels
at the rear of the range.
[]
Insert two machine screws through the holes
at the bottom of each end cap. Secure the
screws to the range flame with the hex nuts
provided.
]
Insert
two ina(hine
screws
through
the fiont
of the backguard
at each end. Se(ure the
screws to the range fi_mm with the hex nuts
prox4ded.
18
Advertisement
Table of Contents
