Toolsyouwill Need - GE RA520W6 Owner's Manual

Installation of the range.
Read these instructions completely and carefully.
WARNING!
Anti-Tip Bracket
• ALL RANGES CAN TIP
• INJURY COULDRESULT
• INSTALLANTI-TIP DEVICE
PACKED WITH RANGE
• SEE INSTRUCTIONS
%
ToolsYouWill Need
• Phillips head s(rew(hiver
• 1:!/_" o r a(!iustable wren(h
• Flat 1)lade s(rew(hiver
Anti-TipBracketInstallationInstructions
Anti-t}9 bracketattaches to thefloortoholdeitherrear
rangeleg.Whenfastening to thefloor, b e surethatthe
screwdoesnotpenetrate electrical w klbg orplumbing. I f
youcannot b e sureof this,usea shorterscrewthat will not
penetrate through thefloonbg
[] Dedde whether the anti-tip bracket will be
installed on the right or le_t side of the range
h)(afion.
[] Screw tim bracket securely to tim floor wifll
the screw provided. The screw is self drilling
in w()od, pl)_vood, pmticle and chip bornd,
and most metal fiaming. If attaching to
mason U, )_u can Ng suitable screws and/or
anchoI's
}Ithardw:ue stores. Use a
IllasonI)"
drill m &'ill the required holes.
[] If tile bracket side of the range is next to a
(abinet, pla(e tile bra( ket against ba(k wall
and cal)inet.
If there is no ac!jacent cabinet, determine
where the location of the range side (painted
outside panel) will be. Place the bracket with
its outside edge at this location and against
the back wall.
Outsideedgeof bracket
shouldbeflushwith the
outsideof tbe range
Adjacentcabinet
or final location
of rangesidepanel
Wall behindrange
Anti-tip bracket / Wail
[] Using the wrench, back out tile fi)ur range
legs at least two turns. I,evel tile range. See
tile Protect YourFIoor and Levelingthe Range
inlbrmafion in tile Installation the range
se( tion of tiffs manual fi)r leveling
intormafion.
[]
Slide tile range into place.
14