Dimensions& Clearances - GE RA520W6 Owner's Manual

Read these instructions completely and carefully.
Dimensions and Clearances
IMPORTANT." Save these instructions for the
local electrical inspector's use.
• See the illusuation below for all rough-in and
spa(ing dimensions. These dimensions must be
met fi)r sate use of your range.
• Tile range may be placed with I_Y," c lemance at
the back wall and 0" clemance (flush) at side
w:dls of the range if the fiont edges of the range
side panels stick {)utbeyond the cabinet fionts
at least 1/4".
• To eliminate tile risk ofbmns or fire when
reaching over hot suflilce elements, cabinet
storage space ab()ve the cooklop should be
avoided. If cabinet storage space is to be
provided ab()ve tile cooktop, the risk can be
reduced by installing a range hood that sticks
out at least 5" be)x md the fiont of the cabinets.
Cabinets installed ab_)ve a cooktop may be no
deeper than 13".
36**
Flush
mount
outlet
Models A B C
20" Wide 20" 20_/¢" 2"
24" Wide 24" 243/¢" O"
_Deptb including handle: 25SAs ".
Depth to frontofcontrol k nobs: 2 6W'.
40W'
Surface 5V4"
mount
outlet
Fromb
of range to \
strain relief '_
clamp 401/4"
Fromcombustible
wails abovecooking
surface
y C 25W'from
wail to front
panel
Preparation
• Rem()ve all tape and pa(kaging.
• Take the accessot T pack out of the (_ven,
• Check to be sure that no range paris have come
loose during shipping.
17