Hoover innovation U4231 Owner's Manual page 15

Remove the four hood mounting
screws, as shown.
Turn cleaner over, pull up on
nozzle control knob to disengage;
and lift up hood. Pull out old bulb
and push in a new one.
With agitator drive pedal set for
"HARD FLOOR" replace hood,
carefully fitting edges inside fur-
niture guard. Reposition nozzle
control knob and press down into
place. Turn cleaner over and
secure hood with screws.
Replace bottom plate by fitting
front edge under tabs on front
of nozzle. Insert screws and
tighten.
14