Clearing Obstructions; Replacing Headlight - Hoover innovation U4231 Owner's Manual

Clearing obstructions
To maintain the strong suction
and cleaning effectiveness of
your cleaner, remove any large
items from the carpet surface
before vacuuming. However, if
your cleaner picks up a larger
object than can be exhausted in
the bag, it can be caught in the
bellows.
To remove an obstruction, first
disconnect cleaner from electri-
cal outlet. Depress button at
lower back of handle to discon-
nect the bellows.
Lower handle to lowest position
and pull bellows from lower bag
area. Remove any obstruction.
Reposition bellows in lower bag
area. Return handle to upright
position, making sure button on
lower back handle returns to
original position.
The headlight
How to replace headlight
Disconnect cleaner from electri-
cal outlet.
This cleaner uses a 12 volt,
wedge base type bulb, part No.
48122-501.
Depress the handle release lever
and lower handle to lowest posi-
tion. Turn cleaner over and
remove the three bottom plate
screws. Lift off bottom plate.
13