Mode - FujiFilm FINEPIX JZ310 series Owner's Manual

7_:TkngP :_uri_ in SR (SCENE/E[OCNIT_O/#} Mo_f_ _
®®, F ram ng Guideline (BestFraming)
ii
In shooting mode, press DISP/BACK to select a
::ishooting display format. Tile selection changes
each time DISP/BACK is pressed.
INFORMATION _ .... _ INFORMATION
ON OFF
BESTFRAM/Nd
::7 BestFraming:To use the best framing, position the
main subject at the intersection of two lines or
align one of the horizontal lines with tile horizon.
::::i % AvoidingBlurred Pictures
::::ilf the subject is poorly lit,
::::iblurring caused by camera
::::ishake carl be reduced by
::::iactivating the [] DUAL IS
::::MODE ((I))1CONTINUOUS,
::::i ((I))2SHOOTING ONLY or OFF
::::lean be set in the setup menu
Tip
When using the camera with a tripod, []
DUAL IS
MODE is recommended to be OFF.
_r Note
::iSensitivity is raised when dual ISis in effect. Note
that blurring may still occur depending on tile scene
or shooting conditions.
16