[] White Balance; [] Continuous - FujiFilm FINEPIX JZ310 series Owner's Manual

U,_nq the Menus: S ;*oot nq MoHe
_r Notes
• FINEPIX COLOR is not reset when the camera is
turned off or another shooting mode is selected.
• Depending on tile subject, the effects of
I_rf-CHROME may not be visible in the monitor.
[] WHITE BALANCE
For natural colors, choose a setting that matches
the light source (for an explanation of "white
balance," see the Glossary on page 100).
Option Description
AUTO White balance adjusted automatically.
-:÷:- For subjects in direct sunlight.
"-'_ For subjects in the shade.
Use under "daylight" fluorescent lights.
Use under "warm white" fluorescent lights.
Use under "cool white" fluorescent lights.
-b,- Use under incandescent lighting.
If AUTO does not produce the desired results
(for example, when taking close-ups), choose the
option that matches the light source.
_r- Note
Resultsvary with shooting conditions. Playpictures
back after shooting to check colors in tile monitor.
[] CONTINUOUS
Capture motion in a series of pictures. The
camera takes up to three pictures while the
shutter-release button is pressed.
_r Notes
• Frame rate varieswith shutter speed.
• Focus and exposure are determined by tile first
frame in each series.
• Tile number of pictures that carl
be recorded depends on the
memory available. Additional
time may be required to record
pictures when shooting ends.
Tile pictures are displayed in the
monitor while recording is in progress.
61