Advertisement
USING THE GENIUS REMOTE TO LEARN ADDITIONAL
FUNCTIONS
READY
LEARN
(Goes out)
(Lights)
READY
LEARN
(Flashing)
(Flashing)
When storing has been performed correctly, the LEARN
indicator lights for about 2 seconds.
Ifthe storingwas not donecorrectly,or the codesare too
longto learn, or no morecodes can be storedin memory
duetomemoryoverflow, t heLEARNindicator andREADY
indicator willflash on and off.
®
®
Set the LEARN/USE mode select switch on the back of the Genius Remote to =USE" and check that the button to
which the code is stored operates correctly. If it does not operate correctly, repeat from step 1.
Repeat steps 3 to 5 to store other keys.
To clear the stored codes from the USER mode.
Set the MULTI-PAGE selectswitchto the USER modeand LEARN/USE modeselectswitchto "LEARN." Then, press
the POWER and the MUTE buttonssimultaneously f or 3 seconds.The =READY"and =LEARN"LEDs willlighttogether.
All MULTI-PAGE KEYS with codes are resetto theirinitialstates.
To rememberstoredcodes,itis convenient t o pastethe labels(user'slabel)providedon thebuttonsfor the USER page.
If the correctlabelsare not provided,it is possibleto writethese letterson an emptylabelwith a ballpointpen.
POWER
READY
LEARN
I ^ II B II c II o I
]1 E II
F II
G II
" I
]1 ' II
J II
K II
L I
MENU
CURSOR
_,o
,,1o
USER'S LABEL
28
Advertisement
