Advertisement
USING THE GENIUS REMOTE TO LEARN ADDITIONAL
FUNCTIONS
The Genius Remote is equipped with a learning function
which allows it to learn additional infrared control codes.
This remote wiUnotonlycontrolthe television, aVCR, and
a cable box, but also other electronic equipment which
uses an infrared remote transmitter, by learning the
transmitter's codes.
Only infrared remote control codes
can be stored in
memory.
Before starting the memory operation
Since the infrared signals sent from the remote transmit-
ter may be reflected by a wall, door, etc., even if the
transmitter is not pointed directly at the device, it may
operate. When storing the remote control codes of an-
other device, tum offthe power of the device (VCR, Cable
Converter, etc.)
If you do not do this, the device may work unexpectedly.
The power could be turned on, an important tape could
be erased, the volume could increase too much, etc..
C2_
READY
LEARN
©
@
LEARNABLE
BUTrONS
These buttonscan =learn"thecodesofotherremote
controltransmitters when the MULTI-PAGE select
switchis set to the =USER"mode.
MULTI-PAGE keys (A through L): No codes
have been factorystoredto these keys.
Leaming buttonsotherthan MULTI-PAGE but-
tons: the codesfor the TV have been storedin
memory.However,the remotecontrolcodes of
otherequipment (cableconverter,audioequip-
ment, etc.) can be stored using the leaming
function as shownon page 27, 28.
EXCLUSIVE
BUTI'ONS
These buttonsare for operatingthe TV.
26
Advertisement
