Advertisement
HOW TO USE THE GENIUS
REMOTE TO CONTROL
YOUR TV
j
(_)
ANT button
Use the ANT (Antenna) button to select between the VHF/UHF and AUX (Auxiliary) antenna inputs.
I
NOTE:
When VHF/UHF is selected, the channel number in the upper right comer of the screen is in green. When
I
the AUX input is selected, the channel number is in yellow.
I
(_
ENTER, CURSOR buttons
MENU,
All the on-screen display features can be set or adjusted by using these buttons.
The =MENU" button will start or exit the on-screen display.
The "CURSOR"buttonswill highlight functionsor adjustdifferentfeatures.
These buttonsare also used for FAVORITE CHANNELS. (see Page 35)
®
I
®
The =ENTER" button will set features to your preference.
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc..
CHANNEL SELECTOR
buttons
Enter two or three numbers to select channels. Enter a =0" first for channels I to 9. Use the "100 _button for channels
100 and higher.
Channel selection may also be performed by pressing channel up ( • ) or down ( • ).
NOTE:
The TV may not receive some channels if you are not in the correct AIR/CABLE mode. See page 32.
I
I
AVX button
The AVX (Auxiliary Video) button will select between the antenna signal and the three sets of video input jacks each
time the button is pressed. If the Picture-in-Picture (PinP) is on, the AVX will select between the three sets of video
input jacks. (See page 21)
ESPN
STEREO
28
STISA
AVX
T
I
AVX
AVX
O
O
VIDEO:3
AVX
O
VIOEO:I
(S-IN)
VIDEO:2
19
Advertisement
