Advertisement
REAR SPEAKER
TERMINAL
CONNECTIONS
Connect after turning the power to the TV OFF.
Press the Right Speaker red button and insert the positive(+) lead wire into the hole below the button. When The button
is released, the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative
(-) lead wire. Repeat this procedure for the Left Speaker.
TO
EXTERNAL<_
SPEAKER
/_CAUTION:
Do notconnectSpeakerssimultaneously t othe REAR SPEAKERterminal of the ProjectionTV
and an extemal amplifier.This could damage boththe "IV and the speakers. Your TV was
designedto use8 Ohm speakersonly.Any othertype may degrade the audio performanceof
yourentertainmentsystem.
PROJECTION TV
SPEAKER
AMPLIFIER
TIPS ON REAR PANEL CONNECTIONS
The S-Video connectionis providedfor high performancelaser discs,VCR's, etc., that have this feature. Use this
connection in place ofthe standardvideo connection if yourdevicehas this feature.
If yourdevice has onlyone audio output(monosound),connectitto the leftaudiojack on the TV.
Refer to the operatingguide of yourother electronicequipmentfor additionalinformationon connecting yourhook-up
cables.
A singleVCR can be used for VCR #1 and VCR #2, but note thata VCR cannot record its own videoor lineoutput
(INPUT: 1 in the example on p. 13). Refer to your VCR operatingguide for more informationon =line" input-output
connections.
14
Advertisement
