GE SpacemakerXL JVM1320 Owner's Manual page 39

nect the power at the main filse or Order g_B36X936 fi'om your GE
circuit breaker panel or pull the
plug.
Remove the screw at the front of
the light cover and lower the cover.
supplier. Tubular 40-watt bulbs
(40Tff/:/2), available in supermar-
kets and hardware stores, may also
be used fk_r replacements.
Replace the screw. Connect electri-
cal power to the oven.
REMOVE SCREWS
[l
Be sure the bulb (s) to be replaced
are cool be%re removing. After
breaking the adhesive seal, remove
the bulb by gently turning.
To replace the oven light, first dis- Next, remove the two screws locat,
connect the power at the main filse
or circuit breaker panel or pull the
plug.
ed above the door near the center
of the oven that secure the light
housing.
Remove the top grille by taking out
the 2 screws that hold it in place.
Replace the burned<nit bulb
with a 30-watt incandescent bulb
(_%02X4235), m_ailable from your
GE supplier.
39