GE SpacemakerXL JVM1320 Owner's Manual page 10

Grounding Instructions/Optional Kits
This appliance must be grounded. If the outlet is a standard 2-prong
PREFERRED
METHOD
Ensure proper ground
exists before use
WARN/NG--lmproper
use of the grounding
plug can result in a risk
of electric shock.
In the event of an electrical short
circuit, grounding reduces tl_e risk
of electric shock by providing an
escape Mre for tt_e electric current.
This appliance is equipped wkh a
power cord having a grounding
Mre with a grounding plug. The
plug must be plugged into an out-
let tt_at is properly installed and
grounded.
Consult a qualified electrician or
sevvice technician if the grounding
instructions are not completely
understood, or if doubt exists as to
whether the appliance is properly
grounded.
wall outlet,
it is your personal
responsibility and obligation to
have it replaced with a properly
grounded 3-prong wall outlet.
Do not under any circumstances
cut or remove the third (ground)
prong fl'om the power cord.
Do not use an adapter plug with
this appliance.
Do not use an extension cord with
this appliance. If the power cord is
too short, have a qualified electri-
cian or sel_'ice technician install an
outlet near the appliance.
For best operation, plug this appli-
ance into its own electrical outlet to
prevent flickering of lights, blowing
of filse or tripping of circuit breaker.
Available at extra cost from your Fi/ter Kits
10
GE supplier.
Filler Panel Kits
JX4OWH--White
JX41--B/ack
JX4OAt--A/mond
When replacing a 36" or 42" range
hood, this kit fills in tt_e addiuonal
widd_ to provide a custom built-in
appearance. For installation
between cabinets only; not fi)r
end-of cabinet installation. Each
kit contains two 3"-wide filler pan-
els. Two kits are needed for a 42"
opening.
JXSIA--Recirculatin9 Charcoal
Filter Kit
To be used when the microwave
oven cannot be vented to the
outside.
Oecorative Panel Kit
JX22SS--Stain/ess Stool
When replacing a Hi/Low range,
tt_is panel kit fills in tt_e area
between tt_e microwave and tt_e
range left by the Hi/Low model.