GE EER2000 Owner's Manual page 15

Usingthe clock and timer, ge.com
Not all features are on all models.
(-stortQ
_oo j
Make sure the clock is setto the
correct time of day.
To Set the Clock
The clock must be set to file correct time
of day for die autonladc oven timing
fimcfions to work properly. Tile time of
day cannot be changed duling a delayed
cooking or a delayed self-<cleaning cycle.
[] Touch tile Clock pad twice.
_] Touch tile + or - pads.
If tile + or - pads are not touched within
one minute after you touch tile Clock
pad, tile display reverts to tile original
setting. If this happens, touch
tile Clock
pad twice and reenter tile time of day:
%
Touch tile Start/On pad until tile
time of day shows in tile display:
This entei_ tile time and starts tile
clock.
Tocheckthetime ofdaywhenthedisplayis
showingotherinformation, simplytouchthe
Clock pad.Thetimeof dayshowsuntilanother
padis touched.
To Turn Off the Clock Display
If you have several clocks in your kitchen,
you may wish to mrn off tile time of day
clock display on your range.
[7] Touch tile
Clock pad
once to turn
off tile time of day display: Although
you will not be able to see it, tile
clock maintains tile correct time
of day.
Touch tile Clock pad twice to recall
tile clock display.
O
(_tchen_
OnlOff
The timer is a minute timer only.
The Clear/Off pad does not affect the
timer.
To Set the Timer
Thetimerdoesnot controlovenoperations.
Themaximum settingonthe timeris 9 hours
and59 minutes.
Touch
tile Kitchen timer On/Off pad.
Touch
die + or - pads until die
amount of time you want shows in
tile display. The maxinmm time that
can be enmred in minutes is 59.
Times more than 59 minums should
be changed m houls and minums.
If youmakea mistake,touchtheKitchen timer
On/Offpadandbeginagain.
%
Touch tile Start/On pad. Tile time
will start counting down, although
tile display does not change un61
one minute has passed.
X_qlen tile timer reaches :00, tile
control will beep 3 times followed by
one beep every 6 seconds until tile
Kitchen timer 0n/0ff pad is touched.
To Reset the Timer
If file display is sdll showing file time
remaining, you may change it by
touching
tile Kitchen timer On/Off pad,
then touching the + or - pads until the
time you want appears in tile display.
If die remaining time is not ill file display
(clock, start time or cooking time are in
die display), recall tile remaining time by
touching tile Kitchen timer On/Off pad and
then touching the + or - pads to enter
the new time you want.
To Cancel the Timer
Touch tile Kitchen timer On/Off
pad twice. /5